View Full Version : Sway bars
07-24-2008, 10:11 PM
I just put on some new Eibach sway bars and wow! 35mm front and 24mm rear. Huge difference and a major pain in the ass to install. It took me almost an hour and a half but it was woth it. My car sticks in corners much harder now.
07-24-2008, 10:13 PM
im taking mine both out :thumb:
07-26-2008, 12:46 PM
thicker bars help with the squishy stock type suspension.
I'm glad you like it :)
07-30-2008, 09:21 PM
My suspension is of the stock type put nothing in it is stock. I just need a new strut tower brace that will fit my Cobra intake and I'll have the entire package.
07-31-2008, 12:13 PM
aah, I didn't ready your sigg.
I'm glad it worked out good on your ride.
Mine had understeer once I put on stiffer coils bc the front bar is too stiff.
08-02-2008, 05:05 PM
thats does make a big difference but put a panhard bar back there like i did and its a whole new car!
08-04-2008, 09:24 PM
Right now I'm to much of a puss to push it to far but I'm sure I'll find the limits eventually and I'll need to do some fine tuning.
Later on I'm planning on a torque arm and then a pan hard bar to finish it of. Thta will be when time and money permit.
08-08-2008, 11:55 PM
i try to push mine on sharp turns and lanes to see what i need to work on next. and a pan hard bar is here im heading after my front suspension. steeda front and rear sway bars and endlinks definitely have my thumbs up.
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.