alex302
Active Member
- Joined
- Aug 27, 2010
- Messages
- 940
- Reaction score
- 17
As some of you know I bought a unfinished 91 turbo 4cly Fox project that has some really nice parts, the plan was to finish it but I decided to part it out. The fox came with this brake setup and 18" fr500 so wheels and brakes are now on my 95 Gt.
The shop that was building the fox made a custom CNC bracket for sn95 spindles to work with the s197 brakes.
Had to do a little grinding to line up the bolt holes.
Here's a pic of the caliper bracket installed with out the rotor.
14" rotors.
Good clearance between rotor and bracket.
I used some washers as spacer to line up the caliper bracket.
08 GT calipers.
The brake line on the passenger side need an adapter from 7/16 to 3/8.
The shop that was building the fox made a custom CNC bracket for sn95 spindles to work with the s197 brakes.
Had to do a little grinding to line up the bolt holes.
Here's a pic of the caliper bracket installed with out the rotor.
14" rotors.
Good clearance between rotor and bracket.
I used some washers as spacer to line up the caliper bracket.
08 GT calipers.
The brake line on the passenger side need an adapter from 7/16 to 3/8.