October 2013 - ROTM - jedpony
Well, after a long battle between some awesome rides, we finally have a winner!! Congrats to jedpony on his victory, and a special thanks to TMI Products for the on-going prize of a $100.00 giftcard!! :-D
jedpony
First of all id like to thank all you guys on this forum that have helped me with tech info and such. I've learned so much about these cars just from searching this forum and asking questions. Its a huge honor to be selected for this contest.
As for the car, i purchased my 95 GT in october of 2011 my senior year in high school. My dad got me into the mustang world, as he has owned many 60s and 70s mustangs and currently has a 2000 GT. I found the car locally here in Pittsburgh on Ebay and after i saw it in person i purchased my first car. The car was in rough shape to say the least with a ripped up top and interior. Ive done my best to bring the car back to life and have huge plans for it.
1995 Mustang Gt 109k Miles
Mods include....
Engine:
Stock HCI
Procharger p1sc @13 psi custom 8 rib setup with a 3 core intercooler
Anderson Powerpipe
75mm Throttle body
Screamin Demon Coil
Ford racing 9mm wires
Smog delete
Battery relocated to trunk
Lucas 42lb injectors
Walbro 255lph fuel pump
Sct chip Dyno tuned by Rodeheavers Hot Rod Shop
Transmission:
Tremec 3550
Summit Racing short throw shifter
Aftermarket clutch (unsure on brand)
Ford Racing Clutch cable + Quadrant
Suspension:
Front MM Coilovers
Rear SVE Springs
KYB AGX Adjustable Shocks
MM CC Plates
Summit Racing LCA's
Prothane sway bar end links
Wheels:
18x9, 18x10 hypercoated FR500's
255 40 18's up front
305 35 18's in the rear
Exhaust:
Mac Equal Length Headers
Pypes Catless X Pipe
Flowtech Terminator Mufflers
2.5 inch SS foxbody LX Tailpipes
Interior:
03 Cobra Steering Wheel
Corbeau FX1 Seat's
White ball shifter knob
Mach 1 bullitt Pedals
Clock gauge pod with boost and water temp (Yet to be installed)
Exterior:
Emerald Green Paint (Not DFG but very similar)
Mach 3.5 inch cowl hood (soon to be replaced)
Saleen s281 wing
shorty antenna
LED License Plate bulbs
Mach 1 Chin Spoiler
Pony Delete
New Convertible Top
Moroso Kill switch (haven't installed yet)
Future Plans:
Trickflow Top End Kit and Custom Cam
Finishing up interior and trunk this winter
Installing roll bar this winter
Custom borla xr1 Side exhaust
New cowl hood, Paint, Cobra Front Bumper or possibly saleen
Lastly A nice set of Forged Wheels to set it apart
Not a good launch, but you get an idea of what the car sounds like. Spinning like crazy with stock gears
[video=youtube_share;6imf2dzqr40]http://youtu.be/6imf2dzqr40[/video]
Well, after a long battle between some awesome rides, we finally have a winner!! Congrats to jedpony on his victory, and a special thanks to TMI Products for the on-going prize of a $100.00 giftcard!! :-D
jedpony
First of all id like to thank all you guys on this forum that have helped me with tech info and such. I've learned so much about these cars just from searching this forum and asking questions. Its a huge honor to be selected for this contest.
As for the car, i purchased my 95 GT in october of 2011 my senior year in high school. My dad got me into the mustang world, as he has owned many 60s and 70s mustangs and currently has a 2000 GT. I found the car locally here in Pittsburgh on Ebay and after i saw it in person i purchased my first car. The car was in rough shape to say the least with a ripped up top and interior. Ive done my best to bring the car back to life and have huge plans for it.
1995 Mustang Gt 109k Miles
Mods include....
Engine:
Stock HCI
Procharger p1sc @13 psi custom 8 rib setup with a 3 core intercooler
Anderson Powerpipe
75mm Throttle body
Screamin Demon Coil
Ford racing 9mm wires
Smog delete
Battery relocated to trunk
Lucas 42lb injectors
Walbro 255lph fuel pump
Sct chip Dyno tuned by Rodeheavers Hot Rod Shop
Transmission:
Tremec 3550
Summit Racing short throw shifter
Aftermarket clutch (unsure on brand)
Ford Racing Clutch cable + Quadrant
Suspension:
Front MM Coilovers
Rear SVE Springs
KYB AGX Adjustable Shocks
MM CC Plates
Summit Racing LCA's
Prothane sway bar end links
Wheels:
18x9, 18x10 hypercoated FR500's
255 40 18's up front
305 35 18's in the rear
Exhaust:
Mac Equal Length Headers
Pypes Catless X Pipe
Flowtech Terminator Mufflers
2.5 inch SS foxbody LX Tailpipes
Interior:
03 Cobra Steering Wheel
Corbeau FX1 Seat's
White ball shifter knob
Mach 1 bullitt Pedals
Clock gauge pod with boost and water temp (Yet to be installed)
Exterior:
Emerald Green Paint (Not DFG but very similar)
Mach 3.5 inch cowl hood (soon to be replaced)
Saleen s281 wing
shorty antenna
LED License Plate bulbs
Mach 1 Chin Spoiler
Pony Delete
New Convertible Top
Moroso Kill switch (haven't installed yet)
Future Plans:
Trickflow Top End Kit and Custom Cam
Finishing up interior and trunk this winter
Installing roll bar this winter
Custom borla xr1 Side exhaust
New cowl hood, Paint, Cobra Front Bumper or possibly saleen
Lastly A nice set of Forged Wheels to set it apart
Not a good launch, but you get an idea of what the car sounds like. Spinning like crazy with stock gears
[video=youtube_share;6imf2dzqr40]http://youtu.be/6imf2dzqr40[/video]