1.7 RR under stock VC's?

Discussion in 'The Safe Zone' started by ElrodKTPQ_89, Sep 2, 2014.

  1. ElrodKTPQ_89

    ElrodKTPQ_89 Legend

    Messages:
    5,068
    Likes Received:
    127
    Joined:
    Aug 6, 2013
    Location:
    Crossett, AR
    I tried to search this on here and a few other sites and couldn't really find a suitable answer. Can the stock GT valve covers be made to work with Crane 1.7 roller rockers (cobra roller rockers) or should I be looking for another set to use? I've heard about being able to take the baffles out of the stock ones to clear but just wanna make sure. I have a set of Edelbrock tall VC's but I need a spacer to clear them and don't really wanna buy one. Thanks for any input.
     
  2. Z06killinsbf

    Z06killinsbf Active Member

    Messages:
    269
    Likes Received:
    0
    Joined:
    Jun 12, 2014
    Location:
    McKinney, TX
    Yes, I ran them on stock VC's. Only thing I did was unbolt the baffle, no cutting/grinding.
     
  3. ElrodKTPQ_89

    ElrodKTPQ_89 Legend

    Messages:
    5,068
    Likes Received:
    127
    Joined:
    Aug 6, 2013
    Location:
    Crossett, AR
    Ok good deal! Appreciate the info!