11” Clutch pressure plate bolts

[Rolltide1006]

Hello all. I am upgrading from a 10.5 to an 11 inch clutch and have found out the pressure plate bolts are bigger. The 10.5 pressure plate bolts are grade 8.8 and I was wondering what grade I need to get for the 11” setup. Thank you for any help/advice


Sent from my iPhone using Tapatalk Pro

 

[96blak54]

Stock flywheel?

Its possible the clutch bolts may not be metric. Take the flywheel to a hardware store and figure out what size bolt it is.

I used socket head machine screws. Sorry tho, i cant remember the size, but the grade was over 8. Most likely grade 10

Sent from my SM-G900P using Tapatalk

 

[Rolltide1006]

Stock flywheel?

Its possible the clutch bolts may not be metric. Take the flywheel to a hardware store and figure out what size bolt it is.

I used socket head machine screws. Sorry tho, i cant remember the size, but the grade was over 8. Most likely grade 10

Sent from my SM-G900P using Tapatalk

Mcleod steel flywheel


Sent from my iPhone using Tapatalk Pro

 

[Rolltide1006]

Stock flywheel?

Its possible the clutch bolts may not be metric. Take the flywheel to a hardware store and figure out what size bolt it is.

I used socket head machine screws. Sorry tho, i cant remember the size, but the grade was over 8. Most likely grade 10

Sent from my SM-G900P using Tapatalk

Ya the stock 10.5 plate bolts are 8.8. I was thinking of going to ACE and getting the same grade if not better.


Sent from my iPhone using Tapatalk Pro

 

[96blak54]

Thats a good idea. And if you need to modify the bolt length, just be sure they are close to the same weight

Sent from my SM-G900P using Tapatalk