Separate names with a comma.
Discussion in 'Build Ups & Projects' started by totalchaos, Nov 9, 2014.
note sure if it has borla or not haven't look that close at yet
Just from the partial view of the tips it may be the Saleen/Borla kit but not sure. You have a rear shot of exhaust and tips might be able to tell from that.
pics of the tips I found online look like Borla tips
Pictures of the engine swap or the overhaul or anything really. Just some pictures for those of us that don't like to read lol. I really want to see that stroked build though.
the engine was swapped into the car before he got it. I will post pic as parts start to come in.
The heads were ordered today , we went trick flow 11r 190 heads. The block got dropped off at the machine shop. Will post pics when I get the heads and block back
I like the Lightning upper
will be for sale...
Filled out an order form for a cam from Ed Curtis.
What is the combination of motor/bore/stroke is needed to get up to a 393?
4.030" bore with a 3.85" stroke.
As nitro has stated it's a 30 over 351w , 3.85 crank , stock length rods , and 302 pistons.
Bidding on a set of center caps for the rims on ebay , the car was missing 2 of them when he bought it.
The heads showed up Friday , will post pics when I have the camera handy.
On a side note my 14 yr old step-son is picking up an 01 v6 coupe , little rough around the edges but should clean up nice. Should be a good little project.
ordered the stroker kit last week. won the center caps on ebay.
Are the LeMans staggered? Best looking SN wheel IMO, of course I'm a little bias.
This should be a lot of fun. Any particular reason for ditching the tubular intake?
Ditching the tubular to go with a trick flow r intake
So scat sent the wrong rings in the kit . Decided to go with a comp cams xe282hr for the cam.