Reply to thread

Message: <blockquote data-quote="fastNA 95GT" data-source="post: 97444" data-attributes="member: 9194">those heads wont fly it will be a pig you need a 60cc at least or a 58cc to get you around 10.5.1 and run on 93 or91AFR 185s with a 2.02 valve and no less spend the money now not twice down the road your putting pistons in buy ones for a bigger valethe top half is very important to strokers I speak from expiernceno cobra intakes or gt40 stuff stay away been down that road. was told to ditch that and bought a performer rpm intake made 399rwhp and 405rwtqi went form 1290 to 1160s with a top half change on my 347 and 331 's rev higher and make more power so remeber that.use at least a 75mm tb and an 80mm mass air no 75mm 77mm.and told me to ditch my cothis was all stuff i was told by ed curtis from flowtechinduction.com his work speaks for itself.i just listened to him and he guranteed 11's like buttermy intake is 4 sale with a 75mm tb check in classifieds.im building a 364cid motor requires a spider intake i got a good price on it pm me.</blockquote>