351 swap

Paul

Legend
Joined
Apr 30, 2007
Messages
9,894
Reaction score
247
Cool - the torque is the best part. Even with a tiny cam, tiny intake, and tiny exhaust my old motor made 442 ft. lbs. at 2600 rpms. :) It gets positively retarded on spray.

TRUUBLE said:
Mine was pretty cheap . . . . ???

Mine too. ??? :(
 

trav_19

Legend
Joined
Dec 18, 2006
Messages
5,615
Reaction score
0
yeah im pretty pumped im doing good internals and heads then its going in the car and i will upgrade parts from there...i will probely do injectors and intake too before i run the car
 

Steven

Legend
Joined
Jun 3, 2007
Messages
8,177
Reaction score
118
Location
SC
I have a bunch of 69/70 windsor motors.. and blocks. I used to be a 5.0 guy, still kinda am, gotta get going on this 4.6
 

trav_19

Legend
Joined
Dec 18, 2006
Messages
5,615
Reaction score
0
Vendetta said:
I have a bunch of 69/70 windsor motors.. and blocks. I used to be a 5.0 guy, still kinda am, gotta get going on this 4.6

where do you live?
 

Steven

Legend
Joined
Jun 3, 2007
Messages
8,177
Reaction score
118
Location
SC
south carolina.. most of these are reserved for the drag car though (my paps motors)
 

MikeF

Member
Joined
Sep 22, 2008
Messages
242
Reaction score
0
I have a 69 351 w i am starting to piece together my oil pan,dizzy,tfs lower and have matched to my stage 3 tfs upper.what brackets for acc. do yall use.I am thinking of putting my v1 set up on it but not untill i upgrade from 42inj. and a sumped tank with bigger fuel lines and rails
 

Latest posts

Forum statistics

Threads
77,438
Messages
1,502,133
Members
14,918
Latest member
Diabolic2010

Members online

Top