That Mustang Guy
Member
I have been asked this question a lot lately and noticed when Googled you don't get a quick and accurate answer. Here is an accurate guide. Hope this helps.
91-08 Stock Modular Piston cc Guide
- Thread starter That Mustang Guy
- Start date
Good info! Good thinking about posting pistons cc's. I never thought of that.
One thing not mentioned is if the pistons are pressed pin or full floating pin. Most all the pistons were full floating by the 2000's. Also the 5.4l are alot lighter than 4.6l, which leads to any of the factory 4.6l pistons will not run in a 5.4l because of the material under the wist pin with interfere with the 5.4l crank weights.
One thing not mentioned is if the pistons are pressed pin or full floating pin. Most all the pistons were full floating by the 2000's. Also the 5.4l are alot lighter than 4.6l, which leads to any of the factory 4.6l pistons will not run in a 5.4l because of the material under the wist pin with interfere with the 5.4l crank weights.
OP
OP
That Mustang Guy
Member
I have built both Windsor and Romeo engines that had a press or floating pin just more weird Ford stuff that I've seen. That's why I didn't mention it but I should have added that in. Thanks for adding that to the piston cc list 96blak54. Thumbs up bud. I cannot find the damn thumb LMAO
