95 347 in progress :)

hottwheels04 · Jan 21, 2015

eesjunin said:
Better heads?
I think i got the best ones out there...this is what i got FR - M-6049-Z304P
I thought these were top of the line?

Deff not , all that is is a larger version of the gt40 heads, its a ford racing casting, ford racing makes that its there aluminum head, when ported they are pretty good,and deff good for your goal of 400-450hp @ the crank, but Trickflow and Afr offer out of the box heads that will outflow that head and make 400-450rwhp. and with the afr heads and trickflows you can port them aswell if not buy even larger versions that will flow isane. heres a couple diffrent ones.

http://www.trickflow.com/partdetail.asp?part=TFS-52615601-C03

http://www.airflowresearch.com/index.php?cPath=21_104

http://www.airflowresearch.com/index.php?cPath=21_105

heres a list of all good AFR , Trickflow heads would go good with a custom cam from him FTI- Ed curtis makes custom cams, or contact anderson ford motorsports.

http://www.flowtechinduction.com/small-block-ford/

http://www.andersonfordmotorsport.com/

http://www.flowtechinduction.com

eesjunin · Jun 24, 2015

Latest progress....little by little... rear window out...interior has been cleaned...sanded, etched, painted...next is to fix the hood and check the fitment with fenders...

Vegasfilter · Jun 24, 2015

nice build...looking forward to following this one! Keep us posted.

BOOOSTD · Jun 24, 2015

Lots of love and time going into this build, but it will be worth it in the end!

eesjunin · Jun 26, 2015

Vegasfilter said:
nice build...looking forward to following this one! Keep us posted.

Thanks!

BOOOSTD said:
Lots of love and time going into this build, but it will be worth it in the end!

Lots!

Time is really an issue in completing this sooner...but cant buy time!

eesjunin · Sep 14, 2015

Have a question...last part to be repaired and to be prepared for the paint- OEM Cobra hood.
I was able to finally find it...however it does need little repair to be done- 2 corners are cracked.
I ran into a dilemma on what the OEM material...as it seems that some OEM hoods are Fiberglass some are SMC ( ?) which take different types of resin to repair it with...
Anyone on here has done repairs to OEM hoods? Any help would be appreciated!