Oct 4, 2024 #1 NEW EDG Active Member Joined Aug 3, 2019 Messages 970 Reaction score 1,490 Location NoVa I tried to jam a flat head in the flange and pry couldn't get the shell to budge and the shell goes all the way through. So I'm guessing these are standard bushings, not hydro. Correct?
I tried to jam a flat head in the flange and pry couldn't get the shell to budge and the shell goes all the way through. So I'm guessing these are standard bushings, not hydro. Correct?
Oct 4, 2024 #2 wmfateam Active Member Joined Aug 23, 2013 Messages 914 Reaction score 321 Location Gilbert, AZ That's what MM says. Mine flexed(03 GT) and I drilled through just to confirm. Goo oozed out. #rulebreaker
That's what MM says. Mine flexed(03 GT) and I drilled through just to confirm. Goo oozed out. #rulebreaker
Oct 4, 2024 #3 RAU03MACH Legend Joined Apr 23, 2019 Messages 8,992 Reaction score 9,414 Location NEW MEXICO once the bolts are out wiggle it back and forth pull while your wiggling it wd 40 comes in handy
Oct 4, 2024 #4 RAU03MACH Legend Joined Apr 23, 2019 Messages 8,992 Reaction score 9,414 Location NEW MEXICO i would stick with moog
