Reply to thread

Message: <blockquote data-quote="bennylava" data-source="post: 1578171" data-attributes="member: 29901">Sounds like a good idea, cutting out multiple trips. This time I cut my worn out belt off and measured it. It seemed to be 105.5 inches long. Then I looked at the model number which was still on the belt, and it said that the belt is 105 and 5/8 inches long. So I ordered one that length, we'll see what happens.The model number tells you the length which was "Gates K061058". Somehow, you're supposed to glean that the "1058" means it's 105 and 5/8" long. Riiight...[URL unfurl="true"]https://www.amazon.com/dp/B000C2WKL8?ref=ppx_yo2ov_dt_b_fed_asin_title[/URL]I've heard you should replace the tensioner because the spring wears out over time. But eh, it seemed fine. Only the idler pulley bearing was worn out, so I got a new pulley. It's a flat pulley though, no edges or ribs like the original. Hope it works out.</blockquote>