another question on the pbr brake swap

[x182dan]

I have a set of pbr calipers fully loaded with the pbr specific banjo bolts any everything. My only question is what do I do for the brake hoses. Can I use the stock 95GT ones or do I need other ones? I've seen posts where people use the SS ones. Can I use brake a hose specific for 99+ gts or I need the SS ones?
Dan

 

[UnNoticed46]

well u can prolly use yur stock lines. i have pbr's on mine and im using the stock lines. no problems

 

[Spd0lit]

i'm pretty sure you can but you are in there so why not swap to SS lines.

 

[x182dan]

i'm pretty sure you can but you are in there so why no swap to SS lines.

$$$

 

[19mustang95]

well u can prolly use yur stock lines. i have pbr's on mine and im using the stock lines. no problems

i've heard alot that you needed the nwer brake lines to work with the calipers? :-\

 

[UnNoticed46]

nope not me. the ones u get in the kit are the same as the stock lines anyway. hell im usin a stocker on one side and one i got in the kit on the other cause i was gonna use both in the kit but ran into a problem tryin to take the old one off so i said fuck it. the new lines are just a little longer