Back from the dead my 02 mustang gt (aka Casper)

I Hello guys and gals it's been a good while since I've been around but I'm back with a new pony. Enjoy


Picked this car up from a friend of mine it has been sitting for seven years sad but true. So it's been about 2 months now that it's been in my possession. So first thing was to get it fired up and make sure everything would be ok with it engine that is so then I know my plan of attack would be and I could move forward. So the moment it got dropped off the flatbed in my driveway I washed it and cleaned the engine so I could work on it without 7 years of dirt and grime build up. The car had a few mods done to it Mac catback which was rusted and needed replaced, bbk tb, pro m mass air meter, Diablo chip, bbk udp's and bbk cold air kit which was rusted badly. So I pulled the plugs and changed them and added a little oil in each cylinder and cranked it over by hand then cranked it but the fuel pump was bad, so I replaced the fuel pump with a bbk drop in unit and replaced the fuel filter and cranked it and started right up was a bit smokey for a while it had a miss to to it but I pulled the chip out and it cleared up so far so good.

02 Oxford White Mustang
Mods so far or things that have been replaced
catback
Upr off-road x pipe
75 mm plenum and TB
Steeda under drive pulleys
JLT CAI
Cobra front brakes
New rear brakes
Smoked headlights
Smoked tail lights
18x9 & 18x 10 black bullitt wheels
Sct tuner
Mach 1 grill delete
Optima red top with aluminum hold down with gt engraved
upr shorty antenna
Buffed out and polished
On to the pics
http://s226.photobucket.com/user/dlf522/media/image.jpg5_zpsonduzlzy.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg4_zpsn0moptyi.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg6_zpsh4zhnjas.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg3_zpsxvfcu207.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg7_zpsixu9a1kn.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg12_zpsw9jkttc5.jpg.html]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg13_zpskr2rcswg.jpg.html]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg8_zps9kfatpi6.jpg.html]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg6_zpsu0ivdty3.jpg.html]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg9_zpsjex88h9s.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg11_zpsb41bi00t.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg12_zpsi7czwp9u.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg10_zpst2gk9ibx.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg24_zpsu8s3mgpc.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg3_zpszcst9vga.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.[FONT=UICTFontTextStyleBody]http://s226.photobucket.com/user/dlf522/media/image.jpg25_zpsslgns3nh.jpg.html][/FONT]http://s226.photobucket.com/user/dlf522/media/image.jpg29_zpsidgkzznx.jpg.html]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s226.photobucket.com/user/dlf522/media/image.jpg33_zpsul2ldndp.jpg.html]

 

Thanks guys I really appreciate kind words. The stang is definitely in the right hands.

 

Well it was completely washed with with cg honeydew car wash and apc mix then decontaminated with iron x, clay barred then compounded using Hd cut and polished with Hd polish. I still have yet to wash it again and put menzerna power lock on it. Thank you

 

A 1st gear pull once I got it running decent.

 

Hey guys got some parts in so getting back to work on this turd.

Added vinyl inserts, led reverse light and led license plate bulbs