Cobra Spliter 94-98

[cameron57]

Who make a spliter for a 94-98 cobra front bumper. I cant seem to find anything on this.

Thanks,
Cameron

Ps Im thinking about a change of direction on my sn. And going more road race/ auto x oreianted.

 

[96blak54]

Well you definitely at the right place! Their are a few fellas here with some trick splitters. They should chime in soon

 

[wmfateam]

ABC exclusive has a cobra bumper front lip combo thing. Other than making one fit like the Roush Autocross guy. He has a nice write up.

 

[cameron57]

Hmmm ya not wanting to buy a whole bumper just a splitter. Id really like a lip without the adjustable rods. Kind of like what the gt500s have. The rods dont bother me since i know there for function. But I just like them without.

 

[Ferocious]

The problem with a cobra bumper is it's not flat. You'll need to make a splitter apron to close the gap or you'll have a negative effect.

You can also grab a boss shinoda hood and mount the splitter flush under it.

As far as your question goes, no one makes a splitter for the 94-98 as far as I'm concerned. Most of the splitters you see are entirely custom.

 

[[email protected]]

We sell a splitter kit that comes with an ABS apron that can easily be trimmed to fit to the cobra bumper
http://www.fullytorquedracing.com/mustang/sn95-1994-1998/1994-2004-sn95-mustang-splitter-kit.html

 

[Z06killinsbf]

I wish we had something along the lines of the "Mirko" that the SVT Contour guys used to get. May have to build a one off.

 

[ttocs]

the shinoda chin makes a good transition between the bumper/splitter and is fairly flat. Not cheap but you gotta pay to play. Not sure I know of anyone making a splitter for our cars specifically

 

[cameron57]

So you need a chin and a spliter?

 

[hotmustang95]

So you need a chin and a spliter?

You don't really need a chin. Just something that will transition from the curves of the cobra bumper to the flatness of a splitter. The Shinoda spoiler has proven to be a great piece for this. I have the Shinoda on mine but it's a GT bumper. Worked great for my splitter.

 

[hotmustang95]

You can also grab a boss shinoda hood and mount the splitter flush under it.

Lol, small world. That's my buddies AI car and my best friends Wife.

 

[Ferocious]

So you need a chin and a spliter?

If you want it to be functional, you need a chin or apron to seal the gap between the fog lights since the underside is not flat.

Otherwise alot of the air will be going straight through that opening and will be rendered useless.

 

[Doodler]

I took a Roush splitter and shaped it to fit a cobra bumper. Absolutely unfunctional though.

 

[96blak54]

Looks awesome though

 

[Ferocious]

Minus the gap in the middle, it looks good. Really wish it went all the way though.

 

[ElrodKTPQ_89]

[MENTION=20396]Orgawesome_98coyote[/MENTION] used a Mach1 chin from latemodel restoration and trimmed it to fit his cobra bumper.

 

[Orgawesome_98coyote]

indeed i did

 

[Orgawesome_98coyote]

A live action shot of it if you prefer. [video]https://youtu.be/GmpLGcv-D4Y[/video]

 

[ReplicaR]

We sell a splitter kit that comes with an ABS apron that can easily be trimmed to fit to the cobra bumper
http://www.fullytorquedracing.com/mustang/sn95-1994-1998/1994-2004-sn95-mustang-splitter-kit.html

You have a picture of this ABS apron? The one in the pictures that you've posted is for GT bumper.

 

[wmfateam]

Uploading from my phone, don't know the quality. But this is what he is taking about.