Coyote SN95

Status
Not open for further replies.
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Thanks 9838stang! Can't wait to work out all the kinks

Sent from my SM-N900V using Tapatalk
 

BMAC96GT

Active Member
Joined
Nov 12, 2009
Messages
983
Reaction score
66
Location
Virginia
This build is awesome. I love it. I plan to do the coyote swap eventually. I appreciate you putting your build on here. What transmission did you end up running? Sorry if I missed it. And were you able to wire your factory gauge cluster for the swap?
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
I appreciate it man. The trans is the stock t-45- until it goes with a Ram HD clutch. The future plans are a built t-45 with a McCloud clutch or a t-56 with a twin disc. As far as the factory cluster, all but the oil and temp guages work. I have an Autometer oil pressure and soon will have the matching coolant temperature piece. Speedo stays the same with factory transmission, the tach is wired to the crank sensor

Sent from my SM-N900V using Tapatalk
 

bluex

Active Member
Joined
Dec 23, 2014
Messages
252
Reaction score
0
All the pics work again, yay! this is a bad @ss car man. Nice work I bet it's a blast to drive.
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Haha there is a lot of money out here, I've seen Hellcats and ZR1's, not trying to mess with that crowd....until TVS or twins!

Sent from my SM-N900V using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Thanks StreetPilot! Good looking stang you got there, wish mine was black.....until it gets dirty lol

Sent from my SM-N900V using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Finally ordered a tuner and what a difference it is from an X3! Now I need to book a dyno tune and get all the kinks worked out.
14ab3996db4c4b4b7616baf69e3b8a12.jpg


Sent from my SM-N900V using Tapatalk
 

96laseredcobra

Well-Known Member
Joined
Nov 29, 2015
Messages
1,422
Reaction score
56
Location
Farmington MO
Finally ordered a tuner and what a difference it is from an X3! Now I need to book a dyno tune and get all the kinks worked out.
14ab3996db4c4b4b7616baf69e3b8a12.jpg


Sent from my SM-N900V using Tapatalk
I love my x4 need to get myself a tune for the gt. Right now it's the 96 Towncar

Sent from my SAMSUNG-SM-G890A using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Yeah, I should've gotten it a while back, the X3 is similar to an old gameboy haha. This one is more useful with the factory engine sensors/gauge readings

Sent from my SM-N900V using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
As for a tune I'm probably going to Racers Edge, they seem to have the Ford modular tunes on point

Sent from my SM-N900V using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Finally got the bracket and P/S tank back from powdercoating
5a1ca09f28131e20b9047bdb58bf6c82.jpg


Sent from my SM-N900V using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Not as much progress as I'd like but it is installed, only to find out I need to fab a hose with a tee on the supply side if the reservoir.
88e4b44d36a729f6cb29c4a4c6719608.jpg
d000a6f2b46efa0c5df515f3ba1b16a3.jpg


Sent from my SM-N900V using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Basically the factory reservoir is hanging out, not mounted to anything. They do not make a bracket that works at least not yet as most swaps go manual brakes and manual steering.
17bf3e28267ffa4eb0243deacec211eb.jpg
babff7ab309d5bfc0c101b769a1165c0.jpg


Sent from my SM-N900V using Tapatalk
 
OP
OP
neverenuff

neverenuff

Active Member
Joined
Nov 23, 2015
Messages
510
Reaction score
7
Finished building the hose and picked up some GT350 coil covers
14c9a65a93d3d531af8e6ea062793bb8.jpg


Sent from my SM-N900V using Tapatalk
 
Status
Not open for further replies.

Latest posts

Forum statistics

Threads
77,435
Messages
1,502,120
Members
14,918
Latest member
Diabolic2010

Members online

Top