Ecu firewall grommet size

lwarrior1016

Mr. Secondary Timing Chain
Staff
Joined
Sep 22, 2014
Messages
8,484
Reaction score
4,236
Location
South Mississippi
I’ve got an odd request for all you folks. I’m trying to gather info on when the opening in the firewall for the ecu wiring harness changed. I know this is tough to get to if you aren’t already working on your car and have the fender liner off. Anyone that’s doing this, if you could measure the opening for me, I would forever be in your debt.

If you do, can you list the year of the car and the dimensions, please?

This is a fox body opening, it is symmetrical and roughly 1 5/8” wide all the way down.
2FAA14B9-1106-4913-A720-FEC5CAEB7B44.jpeg

This is from my 98. It is roughly 1 5/8” at the top and opens to about 2” at the bottom. It’s also taller than the fox.
34404BE8-E28E-45BA-886B-EBDCF64FFA1C.jpeg


I’m trying to determine if this was a switch made with the sn95 in 94, or if it was a 96 change or even a 98 change in preparation for the new edge. So any and all the help I could get would be great. Thanks guys!
 

RAU03MACH

Legend
Joined
Apr 23, 2019
Messages
6,718
Reaction score
6,511
Location
NEW MEXICO
do you think the 97 cobras would be the same i have that part out of the car with cobra harness attached to it i could take a measurement off it
 
OP
OP
lwarrior1016

lwarrior1016

Mr. Secondary Timing Chain
Staff
Joined
Sep 22, 2014
Messages
8,484
Reaction score
4,236
Location
South Mississippi
do you think the 97 cobras would be the same i have that part out of the car with cobra harness attached to it i could take a measurement off it
I’m sure the cobra would be the same as the other 97’s. I’m thinking it’s going to be just like my 98. So yeah, if you could check it out, that would be great.
 

Latest posts

Forum statistics

Threads
77,440
Messages
1,502,174
Members
14,920
Latest member
marktuck99

Members online

Top