Engine rebuild

hookups333

New Member
Joined
Jan 11, 2006
Messages
3
Reaction score
0
Where should i get parts to rebuild my engine. I plan on goin supercharged later so what parts should i get. And should go ahead and make it a 306-347 or stay 302? All help is appreciated.
 

Peter

Well-Known Member
Joined
Jan 10, 2006
Messages
1,585
Reaction score
8
stock bore = lower cost but if the ring ridge has become to big it will need to be bored.

331 or 347 is kinda pointless in a stock block as they arnt very strong.

if you are going to add a blower and it gets bored you should go with low comp pistons and a good set of rings for boosted applications. arp bottom end bolts would be a good idea as well as getting your stock rods shot peened.
 

Peter

Well-Known Member
Joined
Jan 10, 2006
Messages
1,585
Reaction score
8
hookups333 said:
how much power will i lose until im able to get a blower?

none, you can build a good motor with the e cam which is fine to run with a blower too
 

NITROUSINJECTED

Active Member
Joined
Jan 12, 2006
Messages
418
Reaction score
0
call d&d motorsports they will help you out greatly in your choices have a lot of options to go with but you do need some forged pistons
 

Latest posts

Forum statistics

Threads
77,440
Messages
1,502,189
Members
14,920
Latest member
marktuck99

Members online

Top