Estimated Horsepower with my current set-up?

[SN-95.0Beast]

Ok, so i'm looking for personal Estimates at what horepower my current set-up should be putting down, i'm going to the dyno next week and would like to see how close i am to estimated numbers :headbang:

Here is a list of modifacations as it sits now
'95 mustang GT
Motor:
302 bored 30 over to a 306
Diamond CP Pistons
Eagle forged connecting rods
king Race bearings
decks shaved
Auto Specialties Forged aluminum underdrive pullys
Crane cams CompuCam 2031
Cobra Crank
brand new moly rings
adjustable timing chain

Heads:
351 windsor jr heads
Port and polished
over sized valves
both heads were shaved
5 angle valve job
new valve guides
gold crane 1.7 rockers
High energy hardened push rods
brand new black and silver ford racing valve covers

Bolt-ons:
Edlebrock performer RPM intake manifold
BBK 75mm throttle body
MAC chrome intake with k/n filter in fender
MAC long tube headers wrapped in heat wrap
MAC 3'' dual exhaust with H pipe
Flowmaster 40 series mufflers
Fluidline radiator

Fuel/Electronics:
Quarterhorse
Bosch 24lb fuel injectors
Vortech Billet aluminum Adjustable FPR
MSD Distributor cap/rotor
Crane Hi-6 Digital Ignition amplifier w/ Adjustable RPM limiter
SMART SPARK ignition computer
Walboro 290 Fuel pump
Wideband A/F
PRO-M MAF

Transmission & Rear end:
Roush S3 transmission with forged internals
ford racing clutch
FMS 3.55 gear set in differential
FMS Forged aluminum drive shaft
Steeda Tri-ax short throw

Suspension/wheels:
SVT cobra rims, with Toyo proxies
Stillen 3-way adjustable coilovers
Hotschis sway bars
Welded sub-frame

 

[justinschmidt1]

347 rwhp?

I have no idea lol

 

[SN-95.0Beast]

347 rwhp?

I have no idea lol

haha any guess is welcome, i was thinking somewhere around there conservatively

 

[hottwheels04]

around 320-360rwhp I would say.

 

[wannaboost94gt]

290-330 rwhp :dontknow:

 

[duff daddy]

how much hp you make is like saying the girl with the biggest tits is the hottest, there are a lot more important things then how much you can put down.

 

[SN-95.0Beast]

how much hp you make is like saying the girl with the biggest tits is the hottest, there are a lot more important things then how much you can put down.

Very true, just seeing what people thought 'cause i'm goin' to the dyno next week.

 

[SN-95.0Beast]

Goin' to Lebanon Valley speedway in August, so i'll see what kind of 1/4 mile times i get. just picked up a set of Hoisers, so that should help, hopefully

 

[duff daddy]

Goin' to Lebanon Valley speedway in August, so i'll see what kind of 1/4 mile times i get. just picked up a set of Hoisers, so that should help, hopefully

thats one of my local tracks! haha

 

[got5.0]

haha thats my local track too! Shoot me a pm when either of you guys go!

 

[duff daddy]

haha thats my local track too! Shoot me a pm when either of you guys go!

Meet me in Greenfield and well roll out. Go to NED on August 21, 275x

 

[SN-95.0Beast]

Yeah, that would be awesome!

 

[hottwheels04]

did u dyno it yet? I'm interested to see what yours put down

 

[SN-95.0Beast]

Didn't bring it in yet, waiting for some newer tuning software to come in, gonna set 3 different tunes. i'm looking for like +/-350 RWHP. if i run race gas, and hook up my meth injection kit possibly a bit higher. I smoked my buddies 97 Z28 with a header back, C.A.I., 410's, and a tune, so i know i'm not doing too bad, lol

 

[hottwheels04]

Didn't bring it in yet, waiting for some newer tuning software to come in, gonna set 3 different tunes. i'm looking for like +/-350 RWHP. if i run race gas, and hook up my meth injection kit possibly a bit higher. I smoked my buddies 97 Z28 with a header back, C.A.I., 410's, and a tune, so i know i'm not doing too bad, lol

sounds about right I would guess between 310-350rwhp, I made 360rwhp with similar setup,depends on the dyno though.

 

[Venom351R]

haha thats my local track too! Shoot me a pm when either of you guys go!

Meet me in Greenfield and well roll out. Go to NED on August 21, 275x

Im off that weekend too

 

[CanaryGT]

326RWHP