/ Register

Explorer head rebuild estimate?

Discussion in '94-95 5.0 - Specific' started by Nuttinbutcrumbs, Sep 30, 2015.

Thread Status:
Not open for further replies.
  1. Sep 30, 2015 #1
    Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    What would y'all guess the machine shop bill would be to have a set of exploder heads rebuilt? Valve job and all.


    Don't Sext and Drive.
     
  2. Sep 30, 2015 #2
    ranger56528

    ranger56528 Active Member

    Messages:
    907
    Likes Received:
    0
    Joined:
    Aug 20, 2015
    Location:
    West central Mn
    250 to 300 a head at least that's what it was years ago depending on what needed to be done.
     
  3. Oct 1, 2015 #3
    chris91

    chris91 Well-Known Member

    Messages:
    3,761
    Likes Received:
    198
    Joined:
    Apr 20, 2007
    Location:
    Cincinnati, OH
    Call a machine shop and ask.... Every shop is going to be different....
     
  4. Oct 2, 2015 #4
    96blak54

    96blak54 Legend

    Messages:
    7,664
    Likes Received:
    1,000
    Joined:
    Feb 21, 2011
    Location:
    Ky
    Clean, crack detection/pressure check, 3 angle seats, reface valves, true up valve tips, deck the head, quality seals,....assuming rebuildable good known running heads? $300-$400ea from a good machinist. $200ea +the core at Autozone.
     
Thread Status:
Not open for further replies.