for anyone looking for AC vent pods

mineralgreygt

Member
Joined
Apr 15, 2014
Messages
121
Reaction score
1
Location
Massachussetts
Hi all,

I havent been very active on this forum I kind of just stayed over on modded, no rhyme or reason just kind of happened that way. Anyway I currently have the ability to 3D print parts, I've made some custom angled vents pods which sparked some interest over on modded and one thing led to another and I made my own version of factory loooking pods. I figured I would post this in here in case someone was looking for this which doesnt exist as far as i know.

eije39.jpg


2ntepls.jpg


2j1lpn4.jpg


71ky6o.jpg


f57l0k.jpg


nFg05ki.jpg


YDFFwy1.jpg


VM4Ub5Z.jpg


glEbQ3C.jpg


ULZcRZ4.jpg


HmSkEjJ.jpg


I also made an angled version

3BCqscr.jpg


3JzkaXb.jpg


w1IGmMV.jpg


This was the first pod i made which was totally custom, this on another persons car

20141021_153617_zpsfmd1rmtu.jpg


20141021_152934_zpsinerdlrn.jpg


These pods go in just like the factory vents do, please PM if anyone is interested. These parts can be sanded and painted or tumbled or acetone polished or just used as is.

Thanks
 

Tony

Legend
Joined
May 23, 2012
Messages
9,393
Reaction score
973
Location
ohio
man if you still have these when i get started on an air suspension i will 100% be interested in these. pm'd ya for a price.
 

OnyxCobra

Post Whore
Joined
Apr 8, 2006
Messages
14,794
Reaction score
233
Location
Rochester, NY
yeah you might as well just post the price for these if you're gonna make this thread. I always thought these were cool but that last run for sale were way overpriced imo.
 

mineralgreygt

Member
Joined
Apr 15, 2014
Messages
121
Reaction score
1
Location
Massachussetts
sorry guys I wasnt sure what the rules of the forum was so thats why i asked to PM me.

Ive been selling them for 20.00 a piece shipped so if you get two its 40.00 shipped to the lower 48 states.
 

mineralgreygt

Member
Joined
Apr 15, 2014
Messages
121
Reaction score
1
Location
Massachussetts
thanks all,

Yes they still allow air to pass through but you cant direct the air left to right and depending on how deep your gauge is you might have to remove the flap in the back. If you guys are interested please PM me so we exchange info

thanks again
 

OnyxCobra

Post Whore
Joined
Apr 8, 2006
Messages
14,794
Reaction score
233
Location
Rochester, NY
sorry guys I wasnt sure what the rules of the forum was so thats why i asked to PM me.

Ive been selling them for 20.00 a piece shipped so if you get two its 40.00 shipped to the lower 48 states.

That's a LOT more reasonable than the last ones I saw for sale, I hope they are successful for you. I'd like to see some in a more finished looking state.
 

mineralgreygt

Member
Joined
Apr 15, 2014
Messages
121
Reaction score
1
Location
Massachussetts
That's a LOT more reasonable than the last ones I saw for sale, I hope they are successful for you. I'd like to see some in a more finished looking state.

Thanks man, Yea I did some digging and I found someone who kind of made the same thing using a 3D printer as well and it was like 100.00 for a pod, I thought it was a bit overpriced. We actually just got a tumbler at work which should make these parts look really good. http://youtu.be/qZryU-Wr6zY
 

96blak54

Legend
Joined
Feb 21, 2011
Messages
8,125
Reaction score
1,347
Location
Ky
For real! My cut n paste function crapped and I had to type all of that in!
 

OnyxCobra

Post Whore
Joined
Apr 8, 2006
Messages
14,794
Reaction score
233
Location
Rochester, NY
Thanks man, Yea I did some digging and I found someone who kind of made the same thing using a 3D printer as well and it was like 100.00 for a pod, I thought it was a bit overpriced. We actually just got a tumbler at work which should make these parts look really good. http://youtu.be/qZryU-Wr6zY

that looks very promising, when you do some with that smooth finish let me know. I was gonna run my gauges in a clock pod but wasn't really big on how it looked sitting on top of the dash, two of these dash vents would work great but as you said I wasn't gonna pay $200 for em.
 

Latest posts

Forum statistics

Threads
75,161
Messages
1,456,657
Members
13,698
Latest member
rickedeke17

Members online

Top