Cpotts13
Well-Known Member
So I have a few items coming off the Mach within the next week. To be clear they are still on the car as of now. I wanted to post here to gain interest so I can remove them and have a buyer lined up. To be clear, I will not take any money until the item has been removed and fully inspected for defects. They will also be thoroughly cleaned. Any questions please feel free to comment or PM me. First come first served. All transactions will be done through paypal. FYI for the larger items I am willing to drive 1 hour in any direction to meet halfway. I am located in Biloxi MS 39540.
I am also looking for a set pf 99/01 cobra tail lights and wire harness for trade or cash if below parts sell..
FR500's:
Fronts: 18x9 +30mm offset 25.4lbs. Wrapped in Yokohama yk520 245/40/18. 8k miles on the tires.
Rears: 18x10 +22mm offset 26.5lbs. Wrapped in Sumitomo HTR Z 2 285/35/18. 3k miles on the tires.
Notes: I would personally only use the front tires for another 5k or so, however they still grip just fine. Rears are practically brand new. The wheels and rear tires are less than a year old with 3k on them, zero marks or blemishes. The front 2 tires have very minor rash on them. The rash isn't from curbs so its not too deep. Pictures will show the damage.
Price: SOLD SOLD SOLD
Mach 1 13" Front Brakes:
Everything you will need to bolt these up to any 94-04 mustang w/ 17"+ rims. Rotors, calipers, pins, bolts, pads all in good condition and have plenty life left. Rotors OEM brembo and pads are unknown brand until I can remove them. The pads however are VERY low brake dust and bite well. The calipers are OEM PBR's off of a 2003 mach so they are factory powdercoated/painted black.
Price: SOLD SOLD SOLD
Mach 1 catback with pypes m80 mufflers welded in:
Rolled 3 inch tips, pypes m80 mufflers welded in. Mufflers are 1 year old and have 3k on them.
Price: SOLD SOLD SOLD
I am also looking for a set pf 99/01 cobra tail lights and wire harness for trade or cash if below parts sell..
FR500's:
Fronts: 18x9 +30mm offset 25.4lbs. Wrapped in Yokohama yk520 245/40/18. 8k miles on the tires.
Rears: 18x10 +22mm offset 26.5lbs. Wrapped in Sumitomo HTR Z 2 285/35/18. 3k miles on the tires.
Notes: I would personally only use the front tires for another 5k or so, however they still grip just fine. Rears are practically brand new. The wheels and rear tires are less than a year old with 3k on them, zero marks or blemishes. The front 2 tires have very minor rash on them. The rash isn't from curbs so its not too deep. Pictures will show the damage.
Price: SOLD SOLD SOLD
Mach 1 13" Front Brakes:
Everything you will need to bolt these up to any 94-04 mustang w/ 17"+ rims. Rotors, calipers, pins, bolts, pads all in good condition and have plenty life left. Rotors OEM brembo and pads are unknown brand until I can remove them. The pads however are VERY low brake dust and bite well. The calipers are OEM PBR's off of a 2003 mach so they are factory powdercoated/painted black.
Price: SOLD SOLD SOLD
Mach 1 catback with pypes m80 mufflers welded in:
Rolled 3 inch tips, pypes m80 mufflers welded in. Mufflers are 1 year old and have 3k on them.
Price: SOLD SOLD SOLD
