help me find the cheapest sportline springs.

[trav_19]

well just like the title says i NEED springs after everyone picking on me and looking over the pics damn is that embarrasing lol so im looking for the cheapest place so far i got latemodelrestoration at 225...

 

[Suspect]

used. check the corral.

 

[Red96GT]

225 is about as cheap as you are going to get new. Keep in mind you will need and alignment and possible caster camber plates.

 

[Suspect]

http://www.blueovalindustries.com/products.php?catID=9902303

189 for prokit. dunno about sportlines. maybe give em a call. also check ebay.

 

[trav_19]

225 is about as cheap as you are going to get new. Keep in mind you will need and alignment and possible caster camber plates.

thats why im trying to find them cheap

 

[95Boss]

225 is about as cheap as you are going to get new. Keep in mind you will need and alignment and possible caster camber plates.

Is that usually neccessary with a 1 1/2 inch drop?

 

[trav_19]

225 is about as cheap as you are going to get new. Keep in mind you will need and alignment and possible caster camber plates.

Is that usually neccessary with a 1 1/2 inch drop?

a alignment yes.. or you will need tires a lot lol ...the cc plates not always im going to take it to be aligned and if they cant get it into specs then i will buy them no sense wasting money

 

[ju015dd]

maybe try to find some mach 1 springs. not as low but better than what you go. and they are cheaper.

 

[trav_19]

maybe try to find some mach 1 springs. not as low but better than what you go. and they are cheaper.

well i dont want to settle and then always be unhappy with it not being low enough...i guess i will just leave the car in the garage till i can afford the sportlines

 

[Red96GT]

225 is about as cheap as you are going to get new. Keep in mind you will need and alignment and possible caster camber plates.

Is that usually neccessary with a 1 1/2 inch drop?

a alignment yes.. or you will need tires a lot lol ...the cc plates not always im going to take it to be aligned and if they cant get it into specs then i will buy them no sense wasting money

That's exactly what my plan is. 1 1/2 inch is border line for needing caster camber plates. Some people like DropTop got away with it while others needed them.

 

[Kornnut]

Or you could get some 4 banger springs and trim your rears. TRW cs8732 from advance. $60 bucks or so.
http://forums.stangnet.com/showthread.php?t=692538