Mach 460 find

Pale Horse

New Member
Joined
Feb 13, 2011
Messages
83
Reaction score
0
I found a mach 460 rear speaker box with all the speakers and complete harness out of 95. I have a 94 gt without the 460 . My question is will I be able to directly plug it in to my harness? Thanks.
 

Win

Legend
Joined
Nov 20, 2006
Messages
9,516
Reaction score
17
Location
Kennesaw, Ga
I don't know if it will have all the wiring bc of all the added amps and all.
 

Sinned83

Well-Known Member
Joined
Feb 10, 2010
Messages
4,439
Reaction score
56
Location
MA
Might work with some extra wiring but wait for the guru ttocs he'll know for sure

edit: also I think those speakers would be underpowered with no amp
 

Addermk2

Well-Known Member
Joined
Mar 7, 2006
Messages
2,534
Reaction score
55
The interior harnesses are identical. But you'll need the front amp too. I have all of the parts you need in my basement.
 
OP
OP
P

Pale Horse

New Member
Joined
Feb 13, 2011
Messages
83
Reaction score
0
When I looked behind the front kick panel I couldn't find the harness it plugs into. I didn't really want to dig out the wiring either with that being said, because I don't know much about it. Maybe I am wrong but this harness appears different. The rear box does have amps with it, where is the front amp located anyway? Thanks.
 

jwhisl

Active Member
Joined
Dec 28, 2012
Messages
370
Reaction score
3
Location
Oklahoma
The front amp would be located in the middle of the dash, directly under the stereo. There is an extra harness that runs from the front amp, down the drivers side under the door sill plate to the rear amps. There might be another harness for the rear amps that plugs into that. (at least it seemed like there was in my convertible)
So this one goes up front to the stereo: http://www.ebay.com/itm/94-95-96-97...t=Car_Audio_Video&hash=item1e8829f4bb&vxp=mtr

This one goes to the rear amps: http://www.ebay.com/itm/Mach-460-Am...pt=Car_Amplifiers&hash=item19eb8a1a82&vxp=mtr

and this one runs under the kick panel: http://www.ebay.com/itm/Mach-460-Wi...t=Car_Audio_Video&hash=item417013359a&vxp=mtr

this is what the front amp looks like: http://www.ebay.com/itm/Front-Amp-R...t=Car_Audio_Video&hash=item338a58246d&vxp=mtr

But really it wouldn't be that hard to install everything. The wiring is already bent in the right locations so it just lays in place. Everything runs down the drivers side of the car.
 

ttocs

Post Whore
Joined
Oct 9, 2009
Messages
32,616
Reaction score
5,653
Location
Evansville Indiana
sorry late too the party, as he shows there are more then a few hrns's that are needed from the dash/body that can be a pain to get. I think my parts car still has them and I could pull them out if you want. If I were you, keep the rear enclosure for the rear speakers, get some better aftermarket speakes to put in it and run it off of the deck power.
 
OP
OP
P

Pale Horse

New Member
Joined
Feb 13, 2011
Messages
83
Reaction score
0
The aftermarket route maybe the way to go thanks everyone for the replies.
 

ttocs

Post Whore
Joined
Oct 9, 2009
Messages
32,616
Reaction score
5,653
Location
Evansville Indiana
The mach was a great system for its time but I would not go through the trouble of putting one in now unless you are dead set on the stock look. The amps are starting to turn up bad in the past few years and starting to kill more batteries and the speakers are all paper cones that if they have not started to rot yet, they will shortly
 

Latest posts

Forum statistics

Threads
77,492
Messages
1,503,733
Members
14,964
Latest member
bs.austin.tx

Members online

Top