NicksGTR
New Member
- Joined
- Apr 27, 2007
- Messages
- 63
- Reaction score
- 39
So I wanted to remove my steering wheel on my 01 Bullitt. Got the wheel puller out, tightened the bolts into the pot metal and slowly turned the the center bolt to apply pressure on the torx bolt. Pop! One of the tightening bolts pulled out, stripped the threads. I have tried putting my knees behind wheel, hand on top and hitting the torx bolt with my brass hammer while pulling, this thing is stuck. PB Blaster also applied. I have ordered a drill and tap to try the puller again. Fingers crossed. This car has 30k original miles, go figure.