DRKNITE77
New Member
New guy to the SN95forum! A avid lover of all things Mustang and a Mopar guy too. Best of Both worlds
Just recently purchased a VERY CLEAN and tastefully modded 1998 Mustang GT with a full 1999 PI Engine swap from a great guy on CL!
Here are the Mods list and some pics - Hope this works...
-99 PI motor with around 80k on it
-Near new FRPP Romeo PI heads
-Updated PI intake with metal crossover, brandnew and installed in February
-Brand new Tremec 3650 with the .62 overdrivegear. Do 80mph at 2300 rpm with 3.73s. Installed in July.
-Exedy Mach 400 Clutch. Also installed in Julywith new Pilot and Throwout bearings
-Stifflers tubular crossmember
-Dallas Extended range Speedcal
-Energy suspension poly motor mounts and transmount, brand new
-Aeromotive Adjustable fuel pressure gauge
-Converted to 96/97 fuel rail setup
-Bullitt (Cobra/Mach) brakes on all 4 corners, newcalipers out back
-Steeda Lower Control Arms
-BBK springs
-Tokico Illumina shocks/struts
-Maximum Motorsports CC plates
-Tri-Ax shifter with Steeda relocation plate(moves handle 2" closer to driver) and FRPP knob
-Fiore Microclick firewall adjuster, MaximumMotorsports quadrant and new OEM clutch cable
-Replica Bullitt rims 18x8/18x10
-BF Goodrich Sport Comp 2 tires, 2,000 miles onthe tires, TON of tread left
-FRPP aluminum driveshaft
-FRPP 3.73s
-FRPP shorty headers
-BBK Catted H Pipe
-Steeda crank sensor relocation kit
-New Autolite 103s and new Motorcraft wires
-Dynomax Thrush mufflers with Flowmasterstainless tailpipes
-Trick Flow Plenum
-C&L inlet tube to custom sheetmetalheatshield
-Metal overflow tank and power steeringreservior
-Cervinis Cowl hood
-S281 wing
-OEM Cobra bumper
-Envoy foglight retrofit
-DEPO projector headlights
-XenonDepot 4300k HIDs in projector lo-beams,Philips HIR halogens in hi-beams, Nokya Hyper Yellow halogens in fogs
-MAC White face gauges
-Black interior swapped car (reason it has theclock pod since 98s didn't come with them)
-New TMI carpet and LRS Floormats
-TMI upholstery and seat foam installed insummer 2012, still looks brand new
-Craig's Custom no-drill front license platebracket. This OEM Cobra bumper has no holes in it.
Thanks -
Mike De. :icon_salut:
Pics...
Just recently purchased a VERY CLEAN and tastefully modded 1998 Mustang GT with a full 1999 PI Engine swap from a great guy on CL!
Here are the Mods list and some pics - Hope this works...
-99 PI motor with around 80k on it
-Near new FRPP Romeo PI heads
-Updated PI intake with metal crossover, brandnew and installed in February
-Brand new Tremec 3650 with the .62 overdrivegear. Do 80mph at 2300 rpm with 3.73s. Installed in July.
-Exedy Mach 400 Clutch. Also installed in Julywith new Pilot and Throwout bearings
-Stifflers tubular crossmember
-Dallas Extended range Speedcal
-Energy suspension poly motor mounts and transmount, brand new
-Aeromotive Adjustable fuel pressure gauge
-Converted to 96/97 fuel rail setup
-Bullitt (Cobra/Mach) brakes on all 4 corners, newcalipers out back
-Steeda Lower Control Arms
-BBK springs
-Tokico Illumina shocks/struts
-Maximum Motorsports CC plates
-Tri-Ax shifter with Steeda relocation plate(moves handle 2" closer to driver) and FRPP knob
-Fiore Microclick firewall adjuster, MaximumMotorsports quadrant and new OEM clutch cable
-Replica Bullitt rims 18x8/18x10
-BF Goodrich Sport Comp 2 tires, 2,000 miles onthe tires, TON of tread left
-FRPP aluminum driveshaft
-FRPP 3.73s
-FRPP shorty headers
-BBK Catted H Pipe
-Steeda crank sensor relocation kit
-New Autolite 103s and new Motorcraft wires
-Dynomax Thrush mufflers with Flowmasterstainless tailpipes
-Trick Flow Plenum
-C&L inlet tube to custom sheetmetalheatshield
-Metal overflow tank and power steeringreservior
-Cervinis Cowl hood
-S281 wing
-OEM Cobra bumper
-Envoy foglight retrofit
-DEPO projector headlights
-XenonDepot 4300k HIDs in projector lo-beams,Philips HIR halogens in hi-beams, Nokya Hyper Yellow halogens in fogs
-MAC White face gauges
-Black interior swapped car (reason it has theclock pod since 98s didn't come with them)
-New TMI carpet and LRS Floormats
-TMI upholstery and seat foam installed insummer 2012, still looks brand new
-Craig's Custom no-drill front license platebracket. This OEM Cobra bumper has no holes in it.
Thanks -
Mike De. :icon_salut:
Pics...