Nuttinbutcrumbs member ride

Discussion in 'Members Rides' started by Nuttinbutcrumbs, Oct 1, 2015.

Thread Status:
Not open for further replies.
  1. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    Bought in late '95 w 13k miles. The rebuild started in '09 with over 300k miles. You can title the next ride of the month "bang for buck streetcar.
    Well here she is. '95 mustang GT.
    306
    E7 heads
    Comp beehive springs
    Comp cam .512 lift in/ex 281 duration
    Tmoss ported HO lower intake with stock upper
    Stock throttle body and MAF
    19# injectors with FMU
    Stock fuel pump with Vortech's T-rex inline pump
    Vortech V3 6-8 lb boost
    Stock headers
    Stock h-pipe with pre-cats removed and aft cats replaced w "high flow's"
    Forza Flow chambered mufflers
    Dyno tuned by HPP Racing
    332 hp 334 tq
    KYB shocks/struts
    Ford racing b springs
    Standard length weld-in sfc's

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]



    Don't Sext and Drive
     
  2. Ferocious

    Ferocious Legend SN95 Supporter

    Messages:
    12,255
    Likes Received:
    592
    Joined:
    Jun 1, 2011
    Location:
    San Diego
    Please don't start threads in the ROTM section. Only [MENTION=17635]Orange 94[/MENTION] does that. I moved this to the member's ride section. PM me if you have any questions.
     
  3. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    The powers that be... My bad. So umm hey orange, take a look at this beauty...


    Don't Sext and Drive.
     
  4. SNorange94

    SNorange94 Member

    Messages:
    115
    Likes Received:
    0
    Joined:
    Mar 12, 2014
    Location:
    Dingmans ferry, PA
    Pretty damn clean! I think it would look even better with some black wheels! LOL, JK.
     
  5. Cpotts13

    Cpotts13 Well-Known Member

    Messages:
    1,594
    Likes Received:
    36
    Joined:
    Mar 11, 2012
    Location:
    Biloxi, MS
    Wow whats the story behind those seats? They surely aren't factory?
     
  6. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    http://www.stangnet.com/mustang-forums/threads/95-gt-interior-r-r.882477/ Thanks. They're the originals but I had em reupholstered. Speaking of black, when they came back to me the black wasn't black enough so I shot em with some vinyl die. It came out cheaper having them done than if I were to gone the TMI route and the tmi's would've been solid vinyl w a zipper in the back. $800 ish is to much to have a zipper.
    The first exterior pic was taken before the seats were redone. If you zoom in you can kinda see the old gray headrest.
    Oh and the seats were done by a middle aged Mexican transvestite parolee named "Gloria", "but call me "Glo". True story.
    Beat that "Fast and Loud".

    Don't Sext and Drive.
     
  7. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    Thanks man


    Don't Sext and Drive.
     
  8. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    One more thing and I'll stop junking up this section. If anyone is on the market for new carpet, (ha, that rhymes) rockauto is hands down the cheapest place to buy ACC carpet with the mass backing. Before I made a purchase I searched my azz off and even with paying for shipping they still came in cheaper than everywhere else.


    Don't Sext and Drive.
     
  9. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    Oh, and did y'all notice the Mach I chin? If no,
    then I did a good job
    The engine bay is courtesy of duplicolor....

    Don't Sext and Drive.
     
  10. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    ..
     
  11. evilcw311

    evilcw311 Most Evil Mod! Staff Member Staff

    Messages:
    7,145
    Likes Received:
    1,757
    Joined:
    May 9, 2010
    Location:
    Louisville, KY
    Which tmi kit were you looking at that had a zipper?!? The kids I've been looking at are full skin replacements with solid backs and get hog clamped like factory. Back seats get pulled over foam and glued like factory


    This message courtesy of crapatalk!
     
  12. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    I think/thought all of em do
    http://www.mustangandfords.com/proj...custom-tmi-sport-rs-seats-throne-for-a-curve/


    Don't Sext and Drive.
     
  13. Burninriverdiver

    Burninriverdiver Well-Known Member

    Messages:
    2,736
    Likes Received:
    190
    Joined:
    Jan 1, 2014
    Location:
    Akron OH
    [​IMG]
    Edit: sorry I watch too much juvenile crap and couldn't resist. You've got a badass clean ride but it would look killer with some black powder coat on those wheels
     
  14. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    Ha thanks. I'll get a set of the v6 tri-bars and paint em.


    Don't Sext and Drive.
     
  15. blackdemon007

    blackdemon007 Active Member

    Messages:
    286
    Likes Received:
    0
    Joined:
    Aug 31, 2013
    Location:
    Ohio
    Is it just me or is the strut tower bar not bolted to the car in the engine photo?
     
  16. 96blak54

    96blak54 Legend

    Messages:
    7,451
    Likes Received:
    767
    Joined:
    Feb 21, 2011
    Location:
    Ky
    Nope....not just you. Its not bolted in nor is it in proper location.
     
  17. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    Yeah ya got me. I was working on some stuff so I took the brace off so it'd be out of the way. While it was off i decided to paint it again. This time I sanded it down to the bare metal and in some areas it was pretty shiny. For a brief moment I thought about sanding it all to a shine, but I ran out of patients, elbow grease, and sandpaper so I just stuck to the original plan and painted it. After it was dry I just set it up there and took a pic and that's the most recent engine pic I have.
    Is that not the way it goes????



    Don't Sext and Drive.
     
  18. 96blak54

    96blak54 Legend

    Messages:
    7,451
    Likes Received:
    767
    Joined:
    Feb 21, 2011
    Location:
    Ky
    Pass side is below bolt in position
     
  19. Nuttinbutcrumbs

    Nuttinbutcrumbs Active Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Sep 17, 2015
    Location:
    Between the Red and the Rio
    Ha I know, I was just kidding. I'm not running around with it like that. I just threw it up there to take the picture.


    Don't Sext and Drive.
     
  20. 96blak54

    96blak54 Legend

    Messages:
    7,451
    Likes Received:
    767
    Joined:
    Feb 21, 2011
    Location:
    Ky
    Youve done a nice job putting the car together
     
Thread Status:
Not open for further replies.