Nuttinbutcrumbs member ride

Status
Not open for further replies.

Nuttinbutcrumbs

Active Member
Joined
Sep 17, 2015
Messages
353
Reaction score
0
Location
Between the Red and the Rio
Bought in late '95 w 13k miles. The rebuild started in '09 with over 300k miles. You can title the next ride of the month "bang for buck streetcar.
Well here she is. '95 mustang GT.
306
E7 heads
Comp beehive springs
Comp cam .512 lift in/ex 281 duration
Tmoss ported HO lower intake with stock upper
Stock throttle body and MAF
19# injectors with FMU
Stock fuel pump with Vortech's T-rex inline pump
Vortech V3 6-8 lb boost
Stock headers
Stock h-pipe with pre-cats removed and aft cats replaced w "high flow's"
Forza Flow chambered mufflers
Dyno tuned by HPP Racing
332 hp 334 tq
KYB shocks/struts
Ford racing b springs
Standard length weld-in sfc's

14e60be7d966d8ab786e6c94f058d1da.jpg
aaa63104568219e5e1fd0360cb87a537.jpg
805c8bfb2add7400fb6249f0ebb375ed.jpg
93e33408f3a21715c06d50e56a51e9ee.jpg
c9e55258f122995ea3d6ccf0df58c9d3.jpg
f6497a41e452e0cfd59811fb9aff1c3a.jpg
f55300cddb7aa754915314a5e604cbc7.jpg




Don't Sext and Drive
 

Ferocious

Post Whore
SN95 Supporter
Joined
Jun 1, 2011
Messages
12,255
Reaction score
600
Location
San Diego
Please don't start threads in the ROTM section. Only [MENTION=17635]Orange 94[/MENTION] does that. I moved this to the member's ride section. PM me if you have any questions.
 
OP
OP
Nuttinbutcrumbs

Nuttinbutcrumbs

Active Member
Joined
Sep 17, 2015
Messages
353
Reaction score
0
Location
Between the Red and the Rio
Wow whats the story behind those seats? They surely aren't factory?
http://www.stangnet.com/mustang-forums/threads/95-gt-interior-r-r.882477/ Thanks. They're the originals but I had em reupholstered. Speaking of black, when they came back to me the black wasn't black enough so I shot em with some vinyl die. It came out cheaper having them done than if I were to gone the TMI route and the tmi's would've been solid vinyl w a zipper in the back. $800 ish is to much to have a zipper.
The first exterior pic was taken before the seats were redone. If you zoom in you can kinda see the old gray headrest.
Oh and the seats were done by a middle aged Mexican transvestite parolee named "Gloria", "but call me "Glo". True story.
Beat that "Fast and Loud".

Don't Sext and Drive.
 
OP
OP
Nuttinbutcrumbs

Nuttinbutcrumbs

Active Member
Joined
Sep 17, 2015
Messages
353
Reaction score
0
Location
Between the Red and the Rio
One more thing and I'll stop junking up this section. If anyone is on the market for new carpet, (ha, that rhymes) rockauto is hands down the cheapest place to buy ACC carpet with the mass backing. Before I made a purchase I searched my azz off and even with paying for shipping they still came in cheaper than everywhere else.


Don't Sext and Drive.
 

evilcw311

Most Evil Member!
SN95 Supporter
Joined
May 9, 2010
Messages
7,456
Reaction score
2,134
Location
Louisville, KY
Which tmi kit were you looking at that had a zipper?!? The kids I've been looking at are full skin replacements with solid backs and get hog clamped like factory. Back seats get pulled over foam and glued like factory


This message courtesy of crapatalk!
 
OP
OP
Nuttinbutcrumbs

Nuttinbutcrumbs

Active Member
Joined
Sep 17, 2015
Messages
353
Reaction score
0
Location
Between the Red and the Rio

Burninriverdiver

Well-Known Member
Joined
Jan 1, 2014
Messages
2,770
Reaction score
234

Edit: sorry I watch too much juvenile crap and couldn't resist. You've got a badass clean ride but it would look killer with some black powder coat on those wheels
 

blackdemon007

Active Member
Joined
Aug 31, 2013
Messages
286
Reaction score
0
Location
Ohio
Is it just me or is the strut tower bar not bolted to the car in the engine photo?
 
OP
OP
Nuttinbutcrumbs

Nuttinbutcrumbs

Active Member
Joined
Sep 17, 2015
Messages
353
Reaction score
0
Location
Between the Red and the Rio
Is it just me or is the strut tower bar not bolted to the car in the engine photo?
Yeah ya got me. I was working on some stuff so I took the brace off so it'd be out of the way. While it was off i decided to paint it again. This time I sanded it down to the bare metal and in some areas it was pretty shiny. For a brief moment I thought about sanding it all to a shine, but I ran out of patients, elbow grease, and sandpaper so I just stuck to the original plan and painted it. After it was dry I just set it up there and took a pic and that's the most recent engine pic I have.
Nope....not just you. Its not bolted in nor is it in proper location.
Is that not the way it goes???? [emoji6]



Don't Sext and Drive.
 
Status
Not open for further replies.

Latest posts

Forum statistics

Threads
77,439
Messages
1,502,159
Members
14,920
Latest member
marktuck99

Members online

Top