NX Express plate kit nozzle location

[97stanger]

In the near future I am going to start purchasing a 2v NX plate kit with a bunch of goodies. I would like a nice clean install, and was wondering if anybody has mounted the solenoids on the back of the plenum with some sort of fabbed bracket? Here's some pictures from behind my plenum, it looks like there would be plenty of room to mount some solenoids back there for a much cleaner look:

 

[97stanger]

nobody on here has run a 2v NX plate kit?

 

[D3VST8R96GT]

Idk anyone with a plate kit :/

The D3V

 

[Wichers123]

The 2v plate won't work on that edelbrock manifold. You can mount them to the plate just makes everything tighter.

 

[97stanger]

The 2v plate won't work on that edelbrock manifold. You can mount them to the plate just makes everything tighter.

Just curious why it won't work with the Edelbrock manifold?

 

[97stanger]

So is this possibly something I should be looking at?

http://www.modularheadshop.com/NX-30040-1-.aspx

 

[Wichers123]

Yeah the opening on the 2v stock intake is a lot smaller than your eddy. That looks to be the correct kit you posted.