Offical Mod List Thread

[Brian95SVT]

so you recommend FFRP?

 

[AaRoN]

1998 GT 5spd Vert.

GO-
*BBK O/R X-PIPE
*BBK Underdrive pullies
*UPR Bigmouth CAI
*Steeda Tri-Ax short throw

SHOW
*SN95forums supporter decal
*Smoked headlights and corners
*2.5% tint

NEXT MONTH
*Custom 2.5" or 3" catback w/ SLP LMII mufflers
*Eibach or BBK lowering springs, KYB shocks & struts
*New rubber
*FRPP 4.10's

 

[ck5.0]

1998 GT 5spd Vert.

GO-
*BBK O/R X-PIPE
*BBK Underdrive pullies
*UPR Bigmouth CAI
*Steeda Tri-Ax short throw

SHOW
*SN95forums supporter decal
*Smoked headlights and corners
*2.5% tint

NEXT MONTH
*Custom 2.5" or 3" catback w/ SLP LMII mufflers
*Eibach or BBK lowering springs, KYB shocks & struts
*New rubber
*FRPP 4.10's

How do you like the Tri-AX?

 

[AaRoN]

Actually I haven't gotten it just yet but I figured it will be on real soon so I might as well put it on the list. Thanks Chris.

 

[96mod289]

cuz im not gunna swap it to a manual for a while. so i can get the shift kit until
ima just leave the 4.10s in her once i swap it. but yeah ima have to check into transgo
what kinda gears you get? any suggestion on which to go with?

I bought FRPP. i found a set with shims and bearings on sale so i bought them up.

i havent had any problems with them, or heard of anybody elce having any problems. i just kept an eye out and i found a good deal.

 

[98vortech]

ENGINE
Dss racing super modular with pi heads/intake,
vortech supercharger, 2.8" pully
snow meth/water injection
Mac longtubes, mac H pipe no cats, mac produmps
aeromotive fuel set-up with 42 pound injectors
sct tune by mid coast performance
fluidyne aluminum radiator

DRIVETRAIN
Fidanza aluminum flywheel
king cobra clutch
tremec 3550
alum. driveshaft
3.73's true trac

EXTERIOR
black cobra R's 17x9 in front and 17x10.5 with 315 bfg drag radials
ford B springstinted tails and head lights
tinted windows.

INTERIOR
various painted pieces
auto meter shift light with digital rpm gauge
boost pressure, air/fuel, and water temp gauges by autometer

tell me wat ya think i am sure there is some i am missing...

 

[281cammer]

1998 GT VERT (Auto)
BBK CAI
SVO 70mm throttle body
Mac O/R h-pipe
B&M tranny cooler
3.73's
18x9-18x10.5 Chrome Saleen knockoff's
Steeda superlite springs
Mach 1 Tokico struts
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1990 Notchback(5 speed)
Ford 302 Crate motor
Trickflow Streetheat intake
Crane 1.7 RR's
Mac O/R h-pipe and Catback
Mac underdrive pullies
BBK CAI
Eibach Prokit springs
Strange engineering adjustable struts
Megabite Jr lower control arms
Cobra upper control arms
03 Cobra anniversary Brakes on all 4 corners
31 spline diff
31 spline Moser axles
3.73's
17x9 Chrome Saleen knockoff's
245/45(front) 275/40 Nittos dr's(rear)
03 Cobra Front seats with back seat stitched to match
All I can remember at this time
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1996 Cobra Coupe(Just bought)
Engine currently locked up
BBK Long tubes
BBk h-pipe
Flowmaster catback
4.10's
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2001 Viper GTS :naughty:
Head P&P
Intake extrude honed
B&B Longtubes
Corsa Catback

 

[jEEd]

here it goes.... mines going to be pretty short!

My Mod List:

Engine:
Stock 1996 Mustang GT Block (60k miles)
Full Pi Swap (2004 w/ 15k-ish miles + valve job on heads)
Accufab 75mm Throttle body + Plenum

Exhaust:
Flowmasters 40' Catback

Transmission:
Stock 1996 Mustang GT Automatic (soon to be 6speed manual)

Suspension:
Stock Shocks&Struts
Eibach Pro-Kit (1.5" drop)

Exterior:
completely stock / sleeper look O0

Interior:
Escort Passport 8500 x50 Radar Dectector (does that count?)

-----[ C O M I N G S O O N ]-----
1. Magnaflow Catted Tru-X X-Pipe
2. 3.73 Gears
3. vt stage 1 cams
4. SCT / Diablosports Dynotune
5. tranny work
6. exterior work

 

[voidfinger]

good to see so many new faces and nicer cars lol. anyway, still wanting to know how to tint the tails and lights ?

 

[98vortech]

hell yea pm me please :dunno:

 

[jEEd]

heh i'll dig around my computer for pics for a tinted tail light stuff for our cars... i remember reading about it but i decided against it since i painted my calipers red and it goes good w/ my red tail lights :]

 

[MustangMatt96GT]

Engine Mods Currently
Mac CAI
UDP
PI Intake

Exhaust Mods Currently
Stock Manifolds
O/R H-Pipe
Flowmaster 40s

Exterior Mods
Black Beauty headlight kit
Shortened Antenna
Moddedmustangs decal

Interior Mods
White Faced Gauges

Tranny Mods
King Cobra Clutch Kit
Pro 5.0 Shifter
FRPP 4.10 Gears

Suspension Mods
Eibach Proline lowering kit


SOON TO COME!

PI Windsor Heads ported and polished
HiTech Motorsports Stage 3 Cams
Crower Titanium Valve Springs and retainers
PI intake
CAM Long Tube headers
MAC Prochamber


Trying to sell

BBK Shorties

 

[Boomer!]

Well the final plans are set.

Engine:
Bigbore 96' cobra block
Cryoed steel crank
Oliver billit rods
12:1 static compression ratio pistons
Tri metal bearings
Gt 500 4 valve heads ported :thumb:
modified Sullivan intake
Custom ground N/A cams
Melling or V/T billet geared oil pump
Aluminum baffled oil pan
Meziere electric pump with idler
Aeromotive fuel system
Big stuff 3 fuel/ignition management

Exhaust:
Kooks header
Custom H-pipe
Borla mufflers with dumps
Trans:
P.A C4 manual reverse with tranny brake
4800 stall
SFI 164 tooth flywhell

Suspension/brakes:

Front
Chromoly K member with tubular chromoly A-arms
Lakewood 90/10 struts with coilover 150# springs
Aerospace brakes and rotors

Rear
Narrowed 8.8" with 4.30 gear
Four link with coilover
Mini Tubs
Areospace brakes

Body/Cosmetics/interior

Completly gutted shell (96 gt) maximum weight removal
12 point chromoly cage
Fiberglass dash
Kikley 41700 seats with harness
fiberglass front bumper
Skinny Kid racing aluminum drag wing (if needed)
5"cowl hood

I could continue but the list grows and grows. The original play was to do a 2 valve engine, I came acrossed a sweet deal on the heads and intake so that made my mind up. I am trying to make the car streetable and should be able to see 10's on the motor only.

 

[nesqwick_05]

engine mods
powerdyne blower w/8lb pulley
possible pi intake if it doesnt sell

suspension
ford c springs

exhaust
upr o/r x pipe
american thunder c/b

exterier
s281 spoiler
98 cobra wheels
cobra r hood


other stuff
walbro 255lph fuel pump
white faced gauges
pro 5.0 shifter

things to come
accufab tb/plenum
ulca
mt et streets
built rear
new clutch
dyno tune
slp c/b


and other stuff that i havent thought of exist.

 

[ripper]

1996 Rio Red GT coupe

2001 4.6 Romeo block, studded mains, bored and stress honed .20 (3.571)
Cobra crank
Eagle H-beam rods w/ARP 2000 bolts
Probe 18cc dish forged pistons (9.1:1)
Factory PI heads 44cc chamber
Balanced rotating assembly +/- 1 gram
Stage1 cams
ps-1 s/c 42lb inj. twin 255 wallys
2 stage intercooler
custom fabbed 4in tubing (billet alu.)
75mm accufab plenum t/b
Anderson PP
90mm sct MAF
Taylor 10.5 Thundervolts
Alu. Flywheel and driveshaft
Tremec 3650 trani w/ King Cobra clutch
Pro 5.0 shifter
Stock exhaust manifolds ( I know)
MAC o/r prochamber (no cats)
subframe connectors
frrp 4:10 gears
Saleen chrome 10.5x 18
bfg g-force 245f 295d/r's rear
sct 4 bank chip dyno tuned
stock 4x4 suspension lol

 

[voidfinger]

engine mods
powerdyne blower w/8lb pulley
possible pi intake if it doesnt sell

suspension
ford c springs

exhaust
upr o/r x pipe
american thunder c/b

exterier
s281 spoiler
98 cobra wheels
cobra r hood


other stuff
walbro 255lph fuel pump
white faced gauges
pro 5.0 shifter

things to come
accufab tb/plenum
ulca
mt et streets
built rear
new clutch
dyno tune
slp c/b


and other stuff that i havent thought of exist.

Hey how you like those c springs? i am getting a set and was wondering what youthought of them.

 

[nesqwick_05]

a nice drop of an 1inch and half, and i dont haveto worry about clearance issues ever really. :boink:

 

[voidfinger]

i just found out that cj pony parts sells a eibach made prokit under their name and its 169 so i'm going to buy their prokit

 

[Thomas_W]

Can i still post the mod list of my old car?

O0 O0 O0

but im worried i'd take up the whole screen or 3 of everyones computers. LOL

 

[scarface]

Can i still post the mod list of my old car?

O0 O0 O0

but im worried i'd take up the whole screen or 3 of everyones computers. LOL

sure...like we could stop you anyway ???