Reply to thread

Message: <blockquote data-quote="ryclef331" data-source="post: 121288" data-attributes="member: 8067">the lower intake to the heads bolts can be resused just fine. As for the upper intake to the lower...not sure. I usually take a bolt with me that I know threads into the lower, head to lowes. Find the HW section and buy a piece of threaded rod with the same thread pitch. Then buy nuts and washers for the piece of rod. Take it home and cut it up into the lengths you need with a cut off wheel! Be gently as you don't want to fuck up the threads. Screw a nut on the piece BEFORE you cut it....after you've cut it, back the nut off. The nut will clean up the small burs from the cut on wheel. BAM! You just made a set of intake studs for about $5</blockquote>