RAU03MACH
Legend
I want to try somthing like this for a patio shade for the concread slab
Post A Pic Of Your Latest Purchase Thread...
- Thread starter Paul
- Start date
Actually been meaning to buy one of those to switch my feed to -8AN.
Musturd
Post Whore
- Joined
- Feb 12, 2011
- Messages
- 10,494
- Reaction score
- 2,255
It’s a nice upgrade over the stock setup for sure
Snorky
Active Member
- Joined
- Feb 10, 2022
- Messages
- 827
- Reaction score
- 696
That's perfect. I hate the fact that everything aftermarket is 10 feed to dual 8s with an 8 return off of the regulator. It's unnecessary over kill. An 8 feed to dual 6s with a 6 return is more than sufficient for 95% of modders needs.
Musturd
Post Whore
- Joined
- Feb 12, 2011
- Messages
- 10,494
- Reaction score
- 2,255
Agreed , I’m trying to go over kill with the fuel system switching to e85
Snorky
Active Member
- Joined
- Feb 10, 2022
- Messages
- 827
- Reaction score
- 696
E85 is a thirsty option. 33% more required!! Awesome octane rating though.
ttocs
Post Whore
does it fold up? I would be afraid of anything like that in a moderate wind storm but that once or twice a year when it really blows I would not expect to see it again.
It's finally all shipped and will land on Monday. I had planned on getting it installed in July while I'm in Africa but I might do it next week so I can have some fun with the thing before I head off to the dark continent. Thanks to @white95 for the tip on the A-arm bushings. Thinking about grabbing a Kenny Brown rear shock tower brace but I could easily hand plans and materials to the shop and have them fab one up for me. The last one I did cost about $10 in steel and only took about 45 minutes to fab and install.
In total by buying much of the stuff new in box but second hand I saved about $500 on the parts.
RAU03MACH
Legend
Was told guaranteed up to 60 Mph winds
And it is warranty 10 years
It's 4x4 structure poles
Then on the inside of top 1" pipe that has a Dimond structure figure
Heavy duty poly
The cable that runs through is pretty stout with big ass hooks
I'm down
badass98svt
Well-Known Member
- Joined
- Jan 11, 2006
- Messages
- 4,154
- Reaction score
- 1,846
Ordered a Grand Design trunk mat back in February/March and it just arrived a couple days ago.
I wanted a plain carpeted embossed "SVT" design, but apparently they are no longer making them. I had to improvise, and I like the way it came out.
Here's a pic of the box, no peeking!
I'll get some pics of the install when it's done.
I wanted a plain carpeted embossed "SVT" design, but apparently they are no longer making them. I had to improvise, and I like the way it came out.
Here's a pic of the box, no peeking!
I'll get some pics of the install when it's done.
Musturd
Post Whore
- Joined
- Feb 12, 2011
- Messages
- 10,494
- Reaction score
- 2,255
whoa nice find
Traded the Mystic for it. 70 GT Torino, factory M Code 351C 4V car with a shaker. 4V motor got damaged in 2014. Got a 2V in it now, but still got the 4V to bring back to life. The motor is sat in, bolted up, but everything else that could be left undone is- wiring, fuel lines, accessories… but did get it cranked on starting fluid so feel good about it
Just the Mystic or the Mystic and the Coyote?
95GTS302
New Member
- Joined
- Mar 14, 2023
- Messages
- 38
- Reaction score
- 73
Picked up a Holley 7” dash and installed it in my foxbody to compliment the Holley HP I’m already using.
Musturd
Post Whore
- Joined
- Feb 12, 2011
- Messages
- 10,494
- Reaction score
- 2,255
Yea you don’t see the early torinos as much just the bigger boats
Musturd
Post Whore
- Joined
- Feb 12, 2011
- Messages
- 10,494
- Reaction score
- 2,255
Nice dude . I love mine super handy once you get it set up to your liking
Icon 92mm throttle body, adapter and cable bracket
I think I could have made the deal happen without the Yote, but that motor was sketch upon closer inspection so she went too.
cobrajeff96
Well-Known Member
Y tho?
