Project Frosty

Well this is my new project paid $1500 for it no motor or tranny. Bought a motor and trans for $200 and had some stuff laying around for it. Anyway selling one of my other cars and keeping this one. Got the coilovers on it today. Im going to paint it white frost hints its name frosty. This is slow motor for it but should work for now.

 

Thanks tommorow the interior will be in better shape!

 

Motor is a 351w bored .60 over making it a 363. It has some procomp 210 heads I had laying around 1.6 roller rockers, hydro roller lifters, Ford racing b cam, and a pro comp clone of a vic jr. Will be getting my 0n3 kit on it and hopefully get to drive the car. It has a stock c4 trans, with a 3000 stall convertor in it. As for the suspension its a full upr front k member and arms with mmr caster camber plates. It has subframe conectors, torque boxes that need to be put on, strange 10 way shocks with coilovers, and lower control arms.

 

Not much progress today but ill still post some pics.

 

Interior
Wire tuck in progress

 

Got the fuel tank into today

 

Working on making the hot side work

 

Poor boy fuel system

 

Hopefully it will be soon! We had some nice weather here and id love to drive it. Still needs driveshaft, pushrods and some of the turbo piping finished up to be driving. But its getting closer. Next it will be off to paint. I have changed my mined and will be taking it to maico to save some coin for now. It will either be matte white or gloss white.

 

Well that shortblock i had the heads laying around and intake.

 

I had it laying around and you can make them hold 10 pounds for less than $100 so we will se worst case ill have to buy a good carb.