Project "Mercy" - Mustang Chris' 1996 Build Thread *update 11-2-09*

[duff daddy]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

low 12s on N/A??? daaang. lol. .. . . i want low 12s

anyways, the 2.8 maxes out 26 PSI on "common applications" on a proper set up and race only car it can run to 30 PSI. It maxes out at 18,000 RPMs so. im excited. this is starting to shape up ratehr well

good luck on your build, you run low 12s on your blower set up im working for low 12's na on stock bore/stroke....... who will win me with mine at sea level or you up in gods country lol

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

lol, its rough up hear.

Honestly i dont know waht time ill run. Anyone have any ideas? any suggestions? we are looking at:

299-300 CI motor
4v DOHC - 32 valves (and all accompanying moving parts :-( lol)
port matched and polished
25/26 PSI
race gas
2.8L blower
stock T45 (for now... till it breaks lol)
4.10s in an 8.8
eaton posi in the 8.8

im guessing a 12.1 but honestly im not very experienced, so i dono....

 

[duff daddy]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

hey crhis i have that revese torque sequence for you on the teksid block.
right head left head

front of engine

 

[vermilion]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

all i have is 2v info... CHP has a 5.0/5.1 stroker setup for 2k with probe industry setups. they also do free balancing. i am not sure on notching or if you will even need it. i went with MMR though. MMR is pricier. i trust manley products thus far.

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

hm, thanks for the info fellas!

 

[96_SVT_Cobra]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

looks like its coming along very well. cant wait to run it when it is finished, i hope ill bring enough.

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

hey crhis i have that revese torque sequence for you on the teksid block.
right head left head

front of engine

thats how i take off the deck plates and heads and stuff?

 

[duff daddy]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

yea thats the reverse torque sequence for the heads (how to take them off)

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

so if i do the reverse in reverse thats how i put them on?

looks like its coming along very well. cant wait to run it when it is finished, i hope ill bring enough.

i think im more scared than you are. lol.

 

[duff daddy]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

yea jif you were to put them on, start at 10

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

thanks bro. ill shot this over to my machine shop to make sure they put the deck plates on properly.

 

[mikey94gt]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

Looks like fun, bro. Heard you were at 96th and Federal last Friday, guess i shoulda gone......

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

eya, i was there... my car was off in the corner. lol.

 

[mikey94gt]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

I was helping my chick move. she aint my chick anymore...........long story.

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

lol, my chick is in wyoming... just the way i like my chicks...

 

[mikey94gt]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

lol, my chick is in wyoming... just the way i like my chicks...

What, gone? Mustangs get alot more attention when there are no skirts around.......

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

exactly... she comes home every few weeks... . .. and the mustang gets the rest of my time... :-D lol.

 

[uncltrvlnmatt]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

Looks good Chris. Keep the updates coming.

 

[MustangChris]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 8-30-09*

new pieces to add to the pile:
2003 Cobra lower intake manifold.
2003 Cobra timing cover
2003 Cobra Fuel Tank + parts

<img src="http://memimage.cardomain.com/ride_images/2/4359/1841/23395920082_large.jpg">

<img src="http://memimage.cardomain.com/ride_images/2/4359/1841/23395920081_large.jpg">

<img src="http://memimage.cardomain.com/ride_images/2/4359/1841/23395920080_large.jpg">


:-D

 

[mikey94gt]

Re: Project "Mercy" - Mustang Chris' 1996 Build Thread *update 9-17-09*

That looks pretty cool, dude.