quick question LED strip
- Thread starter sn95 bullitt
- Start date
ttocs
Post Whore
With leds all you need to match up is that they are 12v and those are.
OP
OP
sn95 bullitt
Well-Known Member
Sweet. Thanks
chris91
Well-Known Member
Wonder how they'd look under the hood instead of the hood light.
ttocs
Post Whore
the only problem you will have with them is stripping and connecting those itty bitty wires. FYI its easer to melt the insulation off when its that thin and don't bother with crimp connections, you will want to solder it
chris91
Well-Known Member
Usually with those thin wires I will just use my fingernail and strip it. I have thick nails so it usually works. lol
ttocs
Post Whore
I am normally soldering them since its about the only way too connect it so I just touch the wire where I want to strip it with the iron to melt the insulation and then pull.
CC'S95GT
Post Whore
Don't forget to put in a switch so you can turn them on/off.
I assume you'll be removing the stock mercury switch.
I assume you'll be removing the stock mercury switch.
Why would you want to use something that bulky though? I used strips like these in my cars, tiny and easy to hide but great light output
http://www.ebay.com/itm/4-x-30cm-15...513699?pt=US_Car_Lighting&hash=item484a23ece3
http://www.ebay.com/itm/4-x-30cm-15...513699?pt=US_Car_Lighting&hash=item484a23ece3
