racing oil pan

[mike stevens]

I'm going road racing. I have been looking for a road racing pan with no luck. Evidently there is a fitment problem.
what is the fitment issue? Has anybody come up with a work around?

any tech help would be appreciated.

Mike

 

[OLD H2S]

I have one from MMRI am not using so go look it up. Not much for baffling but it hols more and is about 1/2" lower.

 

[mike stevens]

Pardon my ignorance, who is MMRI?

Mike

 

[OLD H2S]

MMR
http://modularmotorsportsracing.com/wp/

 

[mike stevens]

my car is old tech. pushrod 5.0

 

[evilcw311]

my car is old tech. pushrod 5.0

Need to state that in the beginning then.


Sent from my iPhone using Tapatalk

 

[MTRHDROB]

I use a fox body Canton T style pan on my 95. Clutch cable runs into some interference on the pan. I ran it that way with no issues but it wore on my brain. I ended up making a bracket to run the clutch cable outside of the bellhousing and extending the clutch fork to match. Been working great for at least ten years now.

 

[white95]

Stock k-member?

 

[MTRHDROB]

 

[MTRHDROB]

If you are asking me if I have a stock k-member, I did at the time this was done. I am now running an MM k-member with the same setup.

 

[mike stevens]

Great help guys! I was concerned about oil pickup in the turns at 1G plus.

Mike