For Sale SN95 Brembo 14" GT500 big brake kit 800.00

[OLD H2S]

Comes compleat, made by FTR, I just had the Ford rotors ground and the pic shows the thickness left. New Ford hoses, new Hawk 5.0 brake pads and a set Ford stock pads that came with the calipers that are used. I put new crossover stainless tubes when I rebuilt the calipers, impossible to find.The Hake pads are dustless and the stock pads are very dirty. Whole kits has 2000 miles on it. Car is being rebuilt and I am getting too old to go 199. I have 1400 invested and will leave this add up for a week before going to fleabay.
For you on this site 800.

 

[OLD H2S]

I still have this set up...

 

[tbird462002]

Don't you have to run spacers on the hub to make this work?

Sent from my HTC6545LVW using Tapatalk

 

[OLD H2S]

It all depends on what wheel size you run, It must be 18" wheels to fit and the GT500 offset is 45mm for the width so that is the min. required. Many people have to run a 1/4" spacer on a normal 35mm offset Mustang wheel to push the wheel out.





' spacer

 

[white95]

Helluva bargain!! The same basic setup won the CAM-C class @ SCCA Solo nationals in 2016 with Porterfield pads. Good stuff!!!

 

[OLD H2S]

I have the GT500 wheels too, very nice shape, 800.00 firm.

 

[OLD H2S]

Still for sale...but going on flea bay

 

[rob351]

Heck of a setup! I have those calipers on my 95 Cobra.


Sent from my iPhone using Tapatalk

 

[n2o302]

Rob351 what setup are you using caliper wise and what wheels are you using to fit them on offset wise?

Heck of a setup! I have those calipers on my 95 Cobra.


Sent from my iPhone using Tapatalk

 

[rob351]

Rob351 what setup are you using caliper wise and what wheels are you using to fit them on offset wise?

Actually, my calipers are different. Mine are radially mounted.

I’m running OE 2003 17” Cobra wheels.


Sent from my iPhone using Tapatalk