Summit Racing Underdrive Pulley Belt Length

Discussion in '94-95 5.0 - Specific' started by Monsterbishi, Jan 26, 2007.

  1. Monsterbishi

    Monsterbishi Member

    Messages:
    182
    Likes Received:
    16
    Joined:
    Feb 12, 2006
    Location:
    Christchurch, New Zealand
    ok, this is one for the archives, for those who actually use the search button...

    Have just installed Summit Racing's aluminium underdrive pullies, part number SUM-329701. At any rate, belt I used was a 8 1/8" belt, or a 6pk2035 in our local metric terms.

    Keeping in mind, this is with the Smog pump and Aircon pump removed, with no eliminator pulleys.

    It's a very tight fit, you need to turn the crank pulley over to pull it on, but with the tensioner released it lets off about 3/4" so leaving plenty of room for stretch.

    That just about covers it, so here's some keywords for the search

    SN95 Summit Underdrive Pulley Belt Length Gates GT
     
  2. ryclef331

    ryclef331 Well-Known Member

    Messages:
    2,913
    Likes Received:
    9
    Joined:
    Jan 20, 2006
    Very good Tech. Finally...someone else realizes you don't have to drop the money for a delete pulley when you can just buy a new belt!!! O0