super clean modified 97

g_dogg

Member
Joined
May 6, 2006
Messages
182
Reaction score
0
im far from done but here are some update pics.
for those of you who are wondering:
-abc exclusives front cobra bumper with lip (urethane)
-real saleen side skirts with door panels (urethane)
-ground dynamic Type-K Rear Bumper (fiberglass)

shaved off gt signs,ford emblem, antenna, wing.
im goin for a clean look, dont want to look too
much like a modified car. some cars out there look
like space ships.

i fixed the exhaust as well:
-ford racing ceramic coated shorty headers
-magnaflow catted x-pipe (t-304 ss)
-borla (regular) cat-back (t-304 ss)
now i need some new tips cause borla tips are ugly.

on the way are new projector headlights with ultra clear corners.
first thing im doing next summer is big brakes and rims.
what do u guys think so far??

0029.jpg

0015.jpg

0005.jpg


MRSblackdiamond.jpg

Maya MRS, these are only made in 19s , these are the black with polished lip
expensive . th eset will go for 4000$

815418_6_full.jpg

zenetti five, hyper silver finish, available in 18... 2000$

BEYOND3inlip.jpg

konig beyong, available in 18... 1000$

anymore rims suggestions? i dont wanna go with mustang rims, i want something
original. and i do not want chrome or all black.
 

Matt94GT

Post Whore
SN95 Supporter
Retired Staff
Joined
Jan 10, 2006
Messages
11,861
Reaction score
58
Location
Victoria, British Columbia, Canada
God that front bumpers sexy :p

I was thinking of getting the saleen sides too but wasnt sure how they would fit up/line up with the ABC Cobra /w lip front, what are your thoughts on this in person?

Got more pics of that rear bumper?

I like it man, unique not like all the other stangs out there.
 

g_dogg

Member
Joined
May 6, 2006
Messages
182
Reaction score
0
you are right, the front is a little higher than the sides, but most cars are.
In person its NOT noticable at all.
my bodyshop guy says he could extend the front bumper by adding a mach1 chin spoiler
and molding it in and extend it where it needs to be. but if the front is too low then you
would scrape everywhere. I'll leave it like that for now.
actually i saw a pic of your car and decided to get it. fit of the front bumper was excellent.
sides fit awesome too cause the're original. but my rear bumper had to be fitted.
I'll get some more pics of the rear as soon as i put in the new tips.
 

Goindeafonmtx

Active Member
Joined
Jun 16, 2006
Messages
463
Reaction score
0
g_dogg said:
MRSblackdiamond.jpg

Maya MRS, these are only made in 19s , these are the black with polished lip
expensive . th eset will go for 4000$

Those wheels will be sex on that car. I'm really feeling the front fascia and side skirts, but the rear is too flashy for my tastes. But thats why it is your car, because it is your taste! :) :bunny3:
 

Matt94GT

Post Whore
SN95 Supporter
Retired Staff
Joined
Jan 10, 2006
Messages
11,861
Reaction score
58
Location
Victoria, British Columbia, Canada
g_dogg said:
you are right, the front is a little higher than the sides, but most cars are.
In person its NOT noticable at all.
my bodyshop guy says he could extend the front bumper by adding a mach1 chin spoiler
and molding it in and extend it where it needs to be. but if the front is too low then you
would scrape everywhere. I'll leave it like that for now.
actually i saw a pic of your car and decided to get it. fit of the front bumper was excellent.
sides fit awesome too cause the're original. but my rear bumper had to be fitted.
I'll get some more pics of the rear as soon as i put in the new tips.

So many ppl have got that bumper after I got mine lol.

On the rims out of the ones your posted the ones I like most are the zenetti five but not sure if they would suit a stang/your stang...I think the Maya MRS might look better but its hard to say, looking at the wheel its self not really a big fan but im sure it would look wicked on your stang.

But if you dont mind dropping some coin look into "BOZE" they make some killer wheels man I wish I looked into them before I got my roush even though they are expencive.
 

g_dogg

Member
Joined
May 6, 2006
Messages
182
Reaction score
0
The rear is kind of flashy but i needed something that goes low cause i took out the wing.
I hate wings.

Matt i found pics of another car with abc front and saleen sides. his line up better.
i think its cause his font is lower, he has h&r springs.check it out dude

robertsdf3.jpg

robertsdf2.jpg

robertsdf1.jpg
 

g_dogg

Member
Joined
May 6, 2006
Messages
182
Reaction score
0
go for it. cervini stalker is good fit and quality and you wont have to put on door panels like the saleens.

im installing maximum motorsport Camber Caster plates on tuesday.
my car is lowered with KYB agx shocks, and i think eibach springs (they are red but not sure its eibach).
is there anything else i need for my mustang to be properly lowered?
the ford guy told me something about rack bushings?
 

Goindeafonmtx

Active Member
Joined
Jun 16, 2006
Messages
463
Reaction score
0
g_dogg said:
go for it. cervini stalker is good fit and quality and you wont have to put on door panels like the saleens.

im installing maximum motorsport Camber Caster plates on tuesday.
my car is lowered with KYB agx shocks, and i think eibach springs (they are red but not sure its eibach).
is there anything else i need for my mustang to be properly lowered?
the ford guy told me something about rack bushings?
After I lowered my car, my steering was out of whack. So I made the trip to Indy to pick up some Kenny Brown rack bushings. Other things that might help are some taller balljoints and shorter endlinks for the sway bar.
 

Matt94GT

Post Whore
SN95 Supporter
Retired Staff
Joined
Jan 10, 2006
Messages
11,861
Reaction score
58
Location
Victoria, British Columbia, Canada
g_dogg said:
go for it. cervini stalker is good fit and quality and you wont have to put on door panels like the saleens.

im installing maximum motorsport Camber Caster plates on tuesday.
my car is lowered with KYB agx shocks, and i think eibach springs (they are red but not sure its eibach).
is there anything else i need for my mustang to be properly lowered?
the ford guy told me something about rack bushings?

Some people belive that offset rack bushings make it handle worse, some say better. If your car handles fine I would just leave it. CC plates are a must and the MM are the only ones Id ever buy again. Personally I put in offset rack bushings but that was before I did research but im super impressed with the handlign of my car and the tightness of the front end.

You have Eibach Supersports if there red which is one of the lowest drops.
 

JerZeyStangz

Well-Known Member
Joined
Jan 13, 2006
Messages
3,615
Reaction score
39
Location
Northern NJ
Abc front lip cobra bumper gets my vote hands down, its sexy...but i think roush bumper like the yellow stang will set it of man.
 

Ram000

Active Member
Joined
Jan 11, 2006
Messages
361
Reaction score
0
niiice choice, brotha :drunk:

i myself went w/ the rest of abc's kit and like it just fine.
16101104145ra4.jpg
 

waltnono

Active Member
Joined
Jun 29, 2006
Messages
388
Reaction score
0
Location
Southside Chicago
I luv the grill but never cared 4 body kits that much. But hey if you like it and others do, then rock on man :thumb:
 

Dalamar

Post Whore
SN95 Supporter
Retired Staff
Joined
Feb 3, 2006
Messages
13,863
Reaction score
106
Location
SLC, UT
Great looking car G_DOGG.!!

DIFFERENT - I really like that.

bigger wheels will balance it out more since the sides are taller now.
If you wanna see wheels on it, throw a more detailed pic - same view as the first one - and we can chop them on for you to see.

some cars out there look like space ships.
LOL, great comment!

I had the roush on mine, and lower front - YES you will rub.



Matt94GT said:
yea they do line up damn good I was thinking of the Stalker sides when it comes time for me.
where did you get that idea?? -wink-wink-
 

Forum statistics

Threads
74,998
Messages
1,454,298
Members
13,629
Latest member
KillaMustang04
Top