Victor jr kit 2v

Benni614

Member
Joined
Jul 6, 2017
Messages
215
Reaction score
150
Location
Delaware
Ok finally the Victor jr Intake and fuel setup is here. I been dieing to make this swap so here we go!
227c91f75ed6e066daeb949bae72f4eb.jpg
5727fa2d58023c5c89c0419869be59df.jpg
86ec55add30d808bd9e05903f3f163fd.jpg


Sent from my SM-N975U using Tapatalk
 
OP
OP
Benni614

Benni614

Member
Joined
Jul 6, 2017
Messages
215
Reaction score
150
Location
Delaware
After almost 28 hours its in and running.
There was so hiccups that no one or anything said but I have figured them out and well installed and ran the car.
The NPT fittings were my dumb fault i.forgot to add teflon so they leaked.
The strut bar was in the way I decided to remove a portion lol and later weld and bend around it.
The oem feed fuel line and the fuel line from the edlebrock were so long that it was kinky everywhere so I decided to remove so of the oem fuel line and boom it work
Otherwise it was pretty simple i had help from a gd friend of mine but otherwise honestly it wasn't that bad thinking back on it.....
Well later on I will run a few laps ont he highway to test it all out at 12psi
22c910b58356ec9c3a99991ed355afc9.jpg
1e144f22526ffb6f5aecf55856ea9ad8.jpg
10e995a149df0a1656fbb9bee410d0a4.jpg
a81d9988770faaf6b04b92c867f29a3c.jpg


Sent from my SM-N975U using Tapatalk
 

Latest posts

Forum statistics

Threads
77,440
Messages
1,502,187
Members
14,920
Latest member
marktuck99

Members online

Top