what can all be removed from the engine hrns after getting rid of emmissions stuff?

ttocs

Post Whore
Joined
Oct 9, 2009
Messages
32,387
Reaction score
5,557
Location
Evansville Indiana
I am in the final phase of finishing the engine bay and putting the motor back in. The last job I have been avoiding was rerunning the engine bay hrns as I was pretty sure it would be a *****. I ran it back into the interior and have the hole in the trans tunnel made for it to go through and now just need to extend it a little to reach. I have removed all the emissions stuff and was wondering what harnesses are on the main engine harness that I will not need now and could save time extending it by removing those wires?
 

rz5.0

Legend
Joined
Mar 26, 2010
Messages
5,853
Reaction score
131
Location
Great state of TEXAS
Are you doing the complete harness thru the trans. . I started one a while back but never finished.. I was only going to do the inject harness and trans harness from there. . It was a pain cause iv was having to split the harness up in sections. . Not really much that can be removed unless you are removing your ac, abs,
 
OP
OP
ttocs

ttocs

Post Whore
Joined
Oct 9, 2009
Messages
32,387
Reaction score
5,557
Location
Evansville Indiana
yes the whole hrns will come out of the tranny hump at the back of the motor and I will need to add a couple of feet to it. I wasn't sure if anything could come off but wanted to ask.
 

rz5.0

Legend
Joined
Mar 26, 2010
Messages
5,853
Reaction score
131
Location
Great state of TEXAS
I would like to see some pics when you are done.. I was going to leave some part of the harness on the driver side fender. . Like the stuff for the maf, tfi, ac and ccrm.. mainly the injectors harness I was going to run thru the tunnel. Just got busy with the 98 left the 95 just sitting. .
 
OP
OP
ttocs

ttocs

Post Whore
Joined
Oct 9, 2009
Messages
32,387
Reaction score
5,557
Location
Evansville Indiana
I was probably going to do a write up on how to extend a hrns for others that are interested. This will probably be the only time that I can show you something automotive for a change I better enjoy it :)
 

95opal

Well-Known Member
Joined
Jun 21, 2007
Messages
2,972
Reaction score
1,475
I wish I could help but theres nothing left of my original harness and I don't have any ford electrical crap in my car anymore. JFYI I didn't extend anything in that harness although yours is probably a lot different from what I have. The only thing coming out into my bay is the injector wires.
 

Latest posts

Forum statistics

Threads
77,438
Messages
1,502,129
Members
14,918
Latest member
Diabolic2010
Top