will i break 15's?

[hash06]

you should be able to get into the 14s. my best time was a 14.63, don't remember my speed but that was with a 2.08 60ft. it is possible. it may take some practice though

 

[ALITL8]

you should be able to get into the 14s. my best time was a 14.63, don't remember my speed but that was with a 2.08 60ft. it is possible. it may take some practice though

his 60' will determine whether or not he gets in the 14's. the car with his mods is probably capable mid/high 14 i'd say... with the right driver and tires.

 

[Lightning Struck]

i know im running 15.12 at the track with mid 70's wether and iim stock and on street tires but im also pulling a 1.26 60' foot

a 1.26 sec 60ft ??? i think you ment a 2.26 maybe or other wise you just set a world record :-\

:rollinglaugh: :rollinglaugh: :rollinglaugh: :rollinglaugh: :rollinglaugh:

 

[ck5.0]

Just food for thought for him, take those mods on his car, and add P.I. Intake and Heads (non ported and polished heads) just the basic p.i. swap


.....usual plugs + wires >Mac catted h pipe > MAC catback > cold air intake > 70MM throttle body > trickflow upper intake > pro 5.0 shifter > 3:55 gears > and BFG drag radials..........



After the P.I. heads and intake what does everyone think he would run.

 

[19mustang95]

is your car a 5speed? if so you should run in the high 14's if not it'll be hard to break out of the 15's but deffinetly isn't impossible. but as "snakebit"metioned your biggest problem is your still a non pi mustang, hurry up and pi that biatch and forget about 14's and say hello to 13's ;D

there is your answer ck5.0

 

[ck5.0]

Dude how the F did I miss that post by 281powered. Like he said P.I. that beeeaatcchhh.