TrickVert
Active Member
I installed LED tail light bulbs awhile back, and like others here, have been living without my cruise control since. The circuit below fixes the problem using one 5-pin 12VDC relay and a resistor. (I'm not sure that the 10-Ohm resistor is needed, but I didn't want to send the cruise sensor straight to ground.) Note: The Red/Light-green wire is cut to insert the N/O relay contact.
I hope this helps someone out.
![1995 Mustang - LED Brake Lights Cruise Control Fix 2022.JPG 1995 Mustang - LED Brake Lights Cruise Control Fix 2022.JPG](https://www.sn95forums.com/data/attachments/18/18608-dbbbb2cdee404123998ca897fb3aeeaf.jpg)
I hope this helps someone out.
![1995 Mustang - LED Brake Lights Cruise Control Fix 2022.JPG 1995 Mustang - LED Brake Lights Cruise Control Fix 2022.JPG](https://www.sn95forums.com/data/attachments/18/18608-dbbbb2cdee404123998ca897fb3aeeaf.jpg)
Last edited: