rvseverson
New Member
- Joined
- Apr 16, 2024
- Messages
- 5
- Reaction score
- 1
I have a 2000 GT. I’m not getting fuel pressure when I turn the key on. I checked the plug behind the rear bumper and I have 12vdc on the BN/PK to the RD/BK wires out of the FP Driver Module. I checked the pump motor and have ohms across the windings (3.5ohms). I have a needle point 12volt tester to pierce the wires so I get 12vdc on the BN/PK wire (supply) and 12vdc on the RD/BK (return/ground). The problem has been intermittent. I hooked 12vdc directly to the pump and it drew current but didn’t run. Locked up?
Last edited: