how to install c4 in sn95 5 speed car

[blackdevil95]

i have a 95 gt and tired of the stick i want to be consistent and no more breakage from a t5 I'm also worken on a turbo set up to just wondered what all is needed to install a c4 in our cars and also how hard will it be to find a converter that will be close to perfect for a turbo car i plan on keeping a 410 gear in it for 1/4 mile only i really worried bout starter issues crossmember and throttle valve and shift linkage and driveshaft Any input will be great thanks

 

[red95gtcoupe]

Get a ~6''x6'' steel plate. Mark the holes where the tranny mount is on the tranny and then mark the slots on the crossmember. Just did it today. I think the steel plate I used was 3/8''. I used a reverse manual valve body so cant help you with the linkage. I already had a spacer for the driveshaft since I had a 4cyl T5 in my car. I bought mine off ebay. I plan on using a B&M pro stick shifter.