Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1492214" data-attributes="member: 11896">what are you meaning when you say you have continuity and how are you testing for it?  If you have confirmed that power is at the motor in both directions(it will have +/- swapped on the wires) then yes, you have a bad motor.  Now if you only confirmed for example that you have power on the up motion and the window is up all the way you might not be able to hear that it is trying to move if it is at its limit.  Again this is a master/slave switch situation where if one portion of the system goes out(the slave switch) it will take the master out with it and neither work, if the master quits working though the slave can keep working.AGain I would recommend checking the connections in the kick panels where it connects to the main harness that goes over the top of the dash.  A bad connection at either of those harnesses will cause problems and if the dash/heater core has ever been out they have been messed with.</blockquote>