Latest activity
-
delling3 replied to the thread Need diagnostic help.Engine wasn’t pulled, so no to torque Converter. Vacuum leak is possible. Aside from the TB base, or a disconnected vac line, where to... -
96blak54 replied to the thread Diagnosis: tired motor. Rebuild or replace?.Its best to seek out the shops with specialties. Most are old pushrod oriented knowledge base mostly because thats what they use in... -
96blak54 replied to the thread White's '95 GT "Unicorn".Is aftermarket cams offered? Id think a cam hitting at idle would be well worth the effort spent, but thats me
-
if your engaging trans at low idle it will stall out die -
JJ_lope82 reacted to RAU03MACH's post in the thread Getting tired of my Flowmasters, thinking back to Turbos with
Like.
we all have different taste , nothing wrong with that , if it were just me id run on long tube kooks headers with no exhaust straight up -
RAU03MACH replied to the thread Getting tired of my Flowmasters, thinking back to Turbos.we all have different taste , nothing wrong with that , if it were just me id run on long tube kooks headers with no exhaust straight up -
RAU03MACH replied to the thread Need diagnostic help.a friend made that mistake once pulled engine and converter came out a little put the engine back and had problems something like that ...
-
RAU03MACH replied to the thread Need diagnostic help.you did push your torque converter all the way in when reinstalling
-
RAU03MACH reacted to J_lope82's post in the thread Getting tired of my Flowmasters, thinking back to Turbos with Like.
What I noticed is that it’s a lot quieter at idle. It is also quieter at cruising speed and feels smoother. Don’t get me wrong I do like...
-
JJ_lope82 replied to the thread Getting tired of my Flowmasters, thinking back to Turbos.What I noticed is that it’s a lot quieter at idle. It is also quieter at cruising speed and feels smoother. Don’t get me wrong I do like...
-
Yes, that and check for vacuum leaks and rest the throttle body stop screw. I’ve seen this before and it’s the tcc solenoid but I don’t...
-
RAU03MACH replied to the thread Need diagnostic help.the only thing i can think of is vac leaks
-
yes, I did the cam install. Idle speed is right around 700 - pretty much the same before I started this project.
-
delling3 replied to the thread Need diagnostic help.yes, I did the cam install. Idle speed is right around 700 - pretty much the same before I started this project.
-
RAU03MACH replied to the thread Getting tired of my Flowmasters, thinking back to Turbos.i could not make a decent video to save my life ,
