Reply to thread

Message: <blockquote data-quote="duh09" data-source="post: 1560422" data-attributes="member: 10558">If the bracket attachement points on the axle have been removed, they’ll have to be added back to use the OE style soft lines and their attachments. The hard lines won’t be able to be reused as they’re going to be too long now that the rearend is narrowed. If it was my project, I’d probably just step away entirely from the OE style lines- there’s no real reason to use them if you’re basically starting from scratch. You can pick up tabs to weld to the axle for a couple bucks or one of the clamp style mounts like you posted. Stainless or rubber lines would be relatively easy to have made to your specs or finding a usable aftermarket line wouldn’t be hard either- just need to know the banjo fitting size and the thread of the hard lines.</blockquote>