Reply to thread

Message: <blockquote data-quote="rebel842001" data-source="post: 1178155" data-attributes="member: 18161">Ok so here's the deal. I took out the stick 6 disc changer headunit and installed my pioneer in dash screen that I had in my truck. I ordered a mount kit, mach 460 <a href="http://www.autoanything.com/shop/wiring-harness" target="_blank">wiring harness</a> kit, and a 12 to 5 volt reducer that was recommended to eliminate a pop that can be heard if you don't reduce the voltage on the amp power turn on wire. I got all this from Crutchfield. Got all this in the other day so I worked on hooking up the wiring connector to the connector to my in dash screen. Im pretty positive ive hooked it up correctly, since this isn't my first time changing a radio. But im picking up an interference, to me it sounds like an extremely loud fuel pump sound. Only does it when the engine is running, and doesn't change with rpms of engine or the volume of the radio. I turn the radio up to about where I like it I cant hear the interference over the music and general road noise. But if im just cruising through town and turn the music down it drives me insane. Anyone have any clue what the deal is or what I need to check out to eliminate this.</blockquote>