Reply to thread

Message: <blockquote data-quote="BigBore96" data-source="post: 1464386" data-attributes="member: 17566">Question for you guys regarding the 4vs and deleting the thermostat housing but while keeping the overflow tank.I know normally it can be done with just using the 2v lower hose but am in a pickle with that as that connects straight without a bend to the water inlet on the block that already has a 90 in it to face the radiator.My oil relocation inlet isnt at a 90 and more or less straight off the block requiring the hose to do the 90 degree bend.  Anyone know of any setup easily available that keeps the overflow tank and alrdy has a small 90 in the hose for the block?  Or anyone done this with an lines and a fitting combination?</blockquote>